trimmer for gasoline grass where to fill the oil. First start

Trimmeres care

The durability of any motorcycles available is directly affected by the proper operation and care of the garden tool. The operation of the lawn mower depends on this, as well as its effectiveness and speed on the site. There is a list of rules and recommendations, adhering to which the owner of a trimmer for grass will be able to protect the tool from premature breakdowns. Their study and observance will be useful not only for beginners, but also to experienced gardeners.

Before starting a motorcycle, you need to prepare the fuel mixture and pour it into a plastic tank of the tool. At the same time, not only the quality of gasoline and oil for 2-stroke engines plays an important role, but also their ratio in the mixture.

Each manufacturer indicates in the operating instructions that proportion that will be optimal for the corresponding model. The operator needs to observe this norm each time, since otherwise the garden tool motor will quickly fail.

Some brands recommend preparing a fuel mixture in a ratio of 1:25. In practice, this means that in 1 liter of gasoline, you need to dilute the engine oil for the lawn mower in the amount of 40 ml per 1 liter of gasoline. If the management indicates that the proportion should be prepared in a ratio of 1:50, then this suggests that oil for trimmers of gasoline should be diluted in gasoline in an amount of 20 ml per 1 liter of fuel.

It is very important to choose the right fuel and motor oil for a trimmer for grass. It is strictly forbidden to use automobile oils, since their composition contains additives that can harm the operation of the motor motorcycles. It is best to use oils for 2-stroke engines of famous manufacturers: Stihl, Husqvarna or Makita.

It is necessary to buy gasoline for refueling trimmers only at the gas stations of proven brands. Motokos is best for operation, fuel brand AI-92 is suitable. It differs from the 95th gasoline in that it does not contain unnecessary impurities that are used to increase the octane number of fuel.

– Unpacking

We will analyze the example of a popular fubag fpt43 chain.Alcohol. It is easy to manage and a very reliable unit with the most running engine for 1.3 kW.

A braid for grass is delivered in a disassembled form and consists of: motor unit, rod, T-shaped Handles and protective casing. The set includes instruction manual.

This model allows you to work both fishing line on the grass and a cutting disk on dry stems and branches. Both are already in the kit.

In addition to the main parts, which is very pleasant, Fubag equips a braid with a set of tools, a container for gasoline mixture, belt and reliable protective glasses.

How to fix a disk or a fishing line for a trimmer on a trimmer

The cutting mill is attached to the executive organ. The mounting location is called a gearbox. It is not difficult to cope with the task of installing a disk or coil. The principle of consolidating cutting discs on the trimmer is as follows:

  • The figured washer is originally fixed by using a hexagonal key
  • On the shaft set the disk
  • Then install the upper washer, and then tighten it by means of the fastener
  • It is necessary to rotate the nut through a special end key, which is usually equipped with each tool
  • The rotation of the nut is carried out in the direction counterclockwise
  • When rotating, it is necessary to jam the shaft with a hexagonal key

In the opposite sequence, the disk on the trimmer is removed and replaced. Details on how to install a coil with a fishing line on a lawn mower is described in this material.

Preparation of the fuel mixture and refueling

For the convenience of making fuel mixture, it is better to have a special canister. Where one part contains gasoline, and in the other 2 stroke oil. We recommend getting similar, it is very convenient to use https: // ru-sad.RU/Prinadlezhnosti-Dlya-Sadovoy-Tehniki/Dlya-Benzopil/Kanistryi/

Next, take a measured container, with a scale applied to it, with its help you can prepare the mixture as accurately and quickly as possible. See in the instructions which brand of gasoline and 2-stroke oil https: // ru-sad.RU/Prinadlezhnosti-Dlya-Sadovoy-Tehniki/Masla-I-Smazki/recommended by the manufacturer of your lawn mower model. Pour gasoline and oil into a container for the preparation of the fuel mixture, according to the proportions specified in the instructions. Then the finished mixture neatly, through the funnel, pour the trimmer for the grass into the fuel tank. The ratio of gasoline and oil should be just the same as indicated in the instructions. This is a very important point!

A few secrets, how to mow a benzoca

Many people know what the lawn mower looks like, how to use it on overgrown with grass. However, there are some tricks that will allow to mow vegetation faster and more efficiently.

  • When the grass is spent, make movements from right to left, so the cut part will fall on the already processed area. It turns out because the equipment rotates counterclockwise.
  • Large and flat areas are better to process in squares. Always mow from the border of the site to the center.
  • It is better to mow high thickets, moving a trimmer for grass from side to side, starting from left to right. The first movement you mash the total length, and the second. Trim.
  • The mowing of the slope. Use the direct mowing method. Cut the grass along the slope, at the end come back and go through the next fishing line for the trimmer.

Preparation of the fuel mixture

To provide the tool with productive operation, it is important to learn how to prepare the fuel mixture. If your trimmer for grass is equipped with a 4-stroke engine, then with the preparation of combustible liquid you can not bother, since such units work on gasoline, and the oil is poured into a separate container. The fuel-oil mixture is used for flooding in trimmers for grass with 2-stroke engines. To prepare it, you need only 2 components:

Mix the liquids in the ratio specified in the operation manual. It also contains information about what fuel and oil are recommended to use.

Important! In no case should you use a spent car oil. For gasoline trimmers, there are special lubricants of a special consistency and composition.

Prepare such an amount of fuel mixture so that you manage to develop in one cycle, because when stored the oil is precipitated, fuel loses its properties and becomes unsuitable for further use.

Inspection of the reducer of the lawn mower and its lubrication

Checking the gearbox before starting a gasoline trimmer for grass must be carried out on a regular basis. The lack of lubrication or its small amount increases the friction of the gear gear of a gearbox operating at fairly high speeds. As a result, overheating and gears occurs. Motokosa gearbox fails. To prevent the occurrence of such a breakdown during operation and the regular inspection helps.

How to start a petrol grass trimmer

trimmer, gasoline, grass, first, start

If, before the launch of a gasoline braid for grass, an insufficient amount of lubrication in the gearbox or its absence in the case is laid “litol”. To do this, it is necessary to unscrew the screw on the bend of the gear housing and the “lilest” in the amount of 1-2 ml.

Working with a gasoline trimmer for a long time, every 8-10 mothers add grease to the gearbox of the bar.

What lubricant should be used for a trimmer gearbox for grass?

In the process of work, the mechanical part of the trimmer for grass is loaded with contact efforts on the teeth, resistance reactions from adhering grass (sometimes with dirt), dynamic, shock loads due to a constantly changing torque. The lubricant for the gearbox of the trimmer for the grass should fully consider these features, so the selection of the brand should be strictly individual.

The following factors are taken into account:

  • Manufacturer’s brand. Each trademark is not unreasonably focused on lubricants of its own manufacture (you can talk about cheap Chinese products later). This applies to manufacturers such as Husqvarna, Stihl, Huter, Makita, etc. The exception is trimmers for domestic grass: for example, the caliber in the user’s instructions does not indicate a lubrication brand at all.
  • Break of lubrication. As you know, all lubricants are divided into three groups. High.Speed (colloidal systems containing various additives), plastic compounds of universal use and hard lubricants softening during operation.
  • Good adhesion to the surface of the parts of the gearbox, as a result of which the lubricant is not squeezed into the gaps or outside the node.
  • The intensity of lubrication consumption by the gearbox. Here you have to focus on their own experience and recommendations of specialists, since some manufacturers of trimmers, hoping for their own service centers, do not give clear recommendations at all regarding the period of the reducer between two lubricants.

The consumption of the lubricant also depends on the temperature at which it retains its lubricant. When heating the gearbox to 40 ° C, it is believed that its working conditions are satisfactory, and there are enough lubricants.

It is believed that there is no universal lubricant for the gearbox for grass, but this is not entirely. In fact, a suitable lubricant will be the one in which the following components are present:

Gasoline Grass Trimmer and Bush Cutter. INGCO. GBC5434421

  • Anti.Sympathetic supplements, which include toxic lead;
  • Solid lubricants with the presence of graphite or disulfide of molybdenum (the latter is preferable, since the lubricant is completely preserved for the large range of the speed of the shaft);
  • Only mineral (inorganic!) oils, with a high degree of cleaning.

The mentioned requirements are fully met by Gear Grease Oregon or Champion EP-0, domestic compositions Oleo-Mas, Litol.24, or Ammol 158, as well as those recommended by the manufacturer of a particular model of a trimmer for grass.

How to wind a fishing line for a trim for a lawn mower

Winding a new cord on a reel. A rather easy process. For work, a skein of a new fishing line of the desired diameter and shape, a knife for cutting and protective gloves will come in handy for you. The following is the scheme for replacing the fishing line with a reel with 2 antennae, as this is the most common version.

  • Cut the fishing line for a trimmer 2-4 m long (the length of the segment depends on the thickness of the cord and the tips of the manufacturer). Do not use the cord of the larger length, since it will rotate and stretch worse when running.
  • Remove the trimmer head from mounting (each model has a different method of fastening-special latch or a barashka nut) and disassemble it. Gently spread all the details nearby, losing nothing.
  • Wind a fishing line for a trimmer to a reel. There are 2 types of coils: with a dividing side and without it.

Sprout

  • Fold the fishing line for the trimmer in half and put on the bending place on a special groove in the coil. If it is not, simply cut the cord into 2 parts along the fold line and fix the ends in the holders.
  • Pass the tips in special gutters on each part of the coil.
  • Start wrapping the remaining length of the cord in one direction.
  • Leave 20 cm at the ends and place them in opposite directions, stretching into special holes.
  • Cord the cord of the desired length in half.
  • Fix the tips in a coil in special mounts or drive into the holes.
  • On the bobbin indicates the direction of winding, in which direction you need to wind the cord. Wind up, not allowing segments to cross the coil.
  • Dilute the ends on the opposite sides and insert into special slots. The diameter must match.
trimmer, gasoline, grass, first, start

Important! Buy a corporate cord, which is recommended for your lawn mowing model. It is stronger than cheap analogues and will serve longer. Also pay attention to the diameter of the holes in the coils with a dividing side to choose a fishing line for a trimmer of a suitable section. Do not wrap the fishing line for the trimmer tightly, provide it with free move during work.

trimmer, gasoline, grass, first, start

To wind a fishing line for a trimmer to a coil with 1 cutting end, you should not fold the cord, and for mowing heads with 4 antennae, you should prepare 4 pieces of fishing line. Winding scheme is the same as described above.

| Denial of responsibility | Contacts |RSS