What does the makita punch like the original look. Accumulator battery

makita, original, look, battery

How to distinguish the fake of the Makita 2450, 2470 from the original

“ATTENTION. Counterfeit products, HR2450 Peorator Dear customers! At the beginning of 2008, the Makita HR 2450, the year of release 2007-2008, imported into the territory of Russia illegally, appeared on the Russian market. These peorators are made for the Asian market and are not intended for sale and use in Russia, so this tool will not be served by service centers, both under warranty and paid

You can distinguish these models according to their marking plate, on the Asian Poorater HR2450 on the marking plate there is no icon PCT icon. Below you can see photos of marking signs.””

makita, original, look, battery

What can be said? Guys with the office. Ros. The Makita is worried, it seems, only one thing. As if the money for the goods did not pass by their cash desks. They only talk about those peas that “illegally imported into Russia”. A natural question immediately arises: but they are real? How they got here. Another question Let the customs officers deal with this. Who will repair them is also a different question (although if they are real, then what problems, Comuschi from Makita? Pathe do not want to repair your products?). And most importantly: they are made at the Makita factory? Or not? After all, literally. “these peorators are made for the Asian market and are not intended for sale and use in Russia, so this tool will not be served by service centers, both under warranty and paid”. The guys from Rus-Makita, after all, do not say a word about fakes, but only about the “Asian Peorater HR2450”! Maybe so well such a good (really very good. As the scrap was completely correctly noticed) the quality of these “left” peas? Although according to this logic (“these peorators are made for the Asian market and are not intended for sale and use in Russia”)- they turn out not even “left”! Then the official Makita should not drive this product, because it is assembled at their own factory? Tell the consumer garlic. We have two varieties of products: there are more expensive and there is cheaper. Or “kill” the fakes in full, so that “the earth is burning under their feet”. But, it looks like an officer. Rus-Makita for some reason is not at all interested in this. Otherwise, what I wrote here about the differences. They had to do in the first place, and much more detail, more professional than I. And catch the hand (or for another place), those who fake their products. But, I’m afraid they don’t want to catch themselves for this place, therefore, such “children’s” unsubscriptions about fakes. Too similar to the “struggle of Nanai boys”. When one person depicts the titanic struggle of two. I would really like to be mistaken, and with great relief (though!) I will apologize to everyone in front of Rus-Makita, if they prove that this is all not true And this is fakes, not an illegally imported model! But they write the opposite Makita! I respect you and love you. I have 2/3 tools. Yours! After all, we are fighting for you. Not against you!

Filling

If the tool is purchased from an official representative, it is not recommended to disassemble it, since there is a risk of losing the possibility of warranty service.

In the filling of the original electrical screwdriver Makita and fake, you can find differences in the following details:

  • Switch. In the replica it has the simplest design and sharp angles, similar to those that are installed on Chinese.Made tools;
  • Motor. Has some structural differences. The original can also be identified by laser laser. In the replica, the engraving engraving is made by spraying and corresponds to the class of products installed on Chinese.Made tools.

Fake tools can last a rather long time provided that there is careful operation. However, when buying an original Makita electric screwdriver, you can be sure of the reliability of the device, as well as get warranty repairs if necessary.

Buying rules

Makita is only necessary to purchase an electric screwdriver of Makita at specialized stores at a price set by the manufacturer, which can be found on the company’s website. This is the only way to buy the products of the Japanese brand, without doubting its origin. In other cases, it is necessary to make sure in accordance with the goods of the specified marking.

See also  How to revive the battery of an electric screwdriver. Independent remake of the battery for lithium-ion banks

It is important to understand that high.Quality things cannot be sold at too low prices. Therefore, you should not believe the sellers in the market and online services about the sale of warehouse or seasonal promotions that thus explain the low for the products of the brand Makita.

It is necessary to check the package attached to the product. If the fake is supplied only to instructions in English, then the original device will be attached:

makita, original, look, battery
  • Passport for electric screwdriver;
  • Passport for the charger;
  • Quality certificate;
  • Operation Guide in English and Russian.

It should also be borne in mind that the branded product is never part of the sets of tools, and you can only buy it as a separate device. The factory device is always sold in the case for storage and transportation. Before buying, it is necessary to check the characteristic features of proprietary packaging: the color and shape of the suitcase, the quality of manufacture, the availability of marking in certain places, the type and method of applying the name of the brand.

Also read: How to distinguish a stihl chainsaw fake

The thing must be unpacked and subjected to a thorough examination. Signs that allow you to detect a fake, quite a lot. The presence of even one difference from the original serves as a sufficient basis for refusing a dubious purchase.

The main feature of any corporate product is the quality of manufacture. The screwdrivers and peorators of the Japanese brand are characterized by the lack of defects and flaws, the use of high.Quality plastic without an unpleasant chemical smell. Tool body and case have a certain greenish tint. All inscriptions are made by casting. Makita branded font implies smooth letters of the same size with the absence of gaps between them.

Label

On the bottom of the engine housing, a label with a serial number of the device and the date of its manufacture were glued.

The number has seven characters. The fake indicates eight digits.

In addition, the letter “Y” is written on the original label in the lower right corner. A sign that the peorator is produced specifically for the Russian market at the Chinese factory of the company. There can be no other letters there.

Inconsistency of inscriptions on labels

Please note that the font of the inscriptions is also different.

And how to distinguish the original Makita peorator from a fake?

Determine the fake of the Makita 2450, 2470 penetrator at external inspection

You just need to know what to especially pay attention to

The low price of instruments of this class most often indicates for fake.

Makita peorators are not produced in the compositions of various sets.

Determination of fake during external inspection of the suitcase

The main differences begin when examining the appearance of the suitcase (case) for transporting and storing the Makita 2450, 2470 peorators.

The factory suitcase must have inscriptions made by embossing and having squeezed outs. In a fake case, the inscriptions are made in the form of a sticker or letters, manually glued. A fake inscription is easily destroyed by a fingernail.

makita, original, look, battery

The inscription on the case of the original

On the latches of the original case, the names of the tool with embossing, squeezing out the instrument. The fake peorator has such inscriptions on latches, as a rule.

Type of the latch on the original case and fake

When external inspection of the case for storing and transporting the peorator, carefully inspect the gaps between the lids of the suitcase. In the original suitcase, the gaps are either absent or have the same gap around the entire perimeter of the contacts of parts.

Original gaps and fakes

Inspect the back of the case. On the case of the original, the inscription of the word makita is necessarily applied white in depressed letters. Fake cases of such inscriptions do not have.

Determination of the fake during the external inspection of the case of the Makita 2450, 2470

By external inspection of the tool case, you can easily distinguish a fake from the original. The fake of the stator body color is more blue, while the original has more green.

The name on the case of the Makita 2450 peorator is applied by the original method. On the cover of the stator, the inscription is convex, on the cover of the rotor the inscription pressed.

The fake Makita 2450 inscription on the green case is glued and easily removed using the nail. And the inscription on the black case is generally absent.

See also  How to cut plexiglass at home

Fake and original

The fake can be determined and examined by carefully the side handle of the Makita 2450 peorator. On the handle of the original at the site of the pen of the handle, the inscription is applied by pressing the method. The fake has no inscription on the side handle at all.

With a careful external inspection, pay attention to the casting of the plastic parts of the penetrator. The fake has a poor.Quality casting, with torn edges, with traces

Take a closer look at the icons in the area of ​​the mode switch. The original icon has convex and neat. The fake is given by an uneven and torn inscription made with obvious defects.

Original and fake the Makita infantry

In the original Makita 2470, the inscription was made by casting on the stator case and squeezing on the rotor housing.

The inscription on the fake Makita 2470 case is made in the form of a sticker, or made separately glued letters. This is easy to detect by pushing the edge of the sticker or letter with a fingernail.

An additional handle of the original Makita 2470 peorator is applied to two inscriptions. One by casting method, the second by extrusion method. Fakes are available without inscriptions at all.

There are original modorators of the Makita 2450, 2470 peorators, in which the inscription is applied on the green housing of the rotor, but under it the inscription made by squeezing is hidden under it.

Original and fake of the rotor body of the Makita peorator

The original Makita peorator on the side additional handle has two types of inscriptions. One inscription made of white plastic, the second inscription is applied by pressing. The inscription made of white is performed separately by the method of casting and already, then painted white. In fakes, the inscriptions on the side handle are completely absent.

Inscription on the handle of the original and the absence of it on a fake

Makita peorators are found, in which a self.Adhesive sticker is glued to the housing. But if you look closely, then under the sticker the inscription Makita, executed by pressing.

Photo of self.Adhesive and inscriptions pressed on the original

Information sticker

Such a sticker is located on the side of the device case. It contains information about the technical characteristics of the device, as well as about its place of production. Comparing the sticker on the original and fake pedorator, you can notice the following inconsistencies:

  • A different value of current strength is 3.4 A in the original versus 3.7 and at the fake;
  • The voltage in the original device has been declared 230-240 V, and in fake the standard 220V;
  • Lack of EAC icon on a fake sticker.

By the way, read this article too: adhesive gun: what can be glued, types of consumables, characteristics of popular models

You can also notice that on the original sticker, all words are written in Russian. There is an inscription “Made in China” also in Russian.

Information on the stickers is very different

On a fake sticker, all information is in English, and even incomprehensible numbers 30s/60s are indicated.

Popular fakes of screwdrivers

Most often, scammers are faked by the most popular models of screwdrivers and peorators of the Makita brand. Compared to the originals, Chinese fakes maintain performance for 1-2 weeks, so it is advisable to avoid such situations and carefully check the device.

A characteristic sign of imitation is the difference in indicating the power of the device:

  • Makita DF330DWE in the original version is designed for power 10.8 volts, and the fake indicates 12V.
  • Makita DF457DWE and DF331DWE can be distinguished by a power parameter of 24 volts and 18 volts.

A distinctive feature characterizing fake screwdrivers is an indication as a producer of Japan, and not China.

And how to distinguish the original Makita peorator from a fake?

Determine the fake of the Makita 2450, 2470 penetrator at external inspection

You just need to know what to especially pay attention to

The low price of instruments of this class most often indicates for fake.

Makita peorators are not produced in the compositions of various sets.

Determination of fake during external inspection of the suitcase

The main differences begin when examining the appearance of the suitcase (case) for transporting and storing the Makita 2450, 2470 peorators.

Makita Battery Tests | Run Time, Charge Time, Weights etc

The factory suitcase must have inscriptions made by embossing and having squeezed outs. In a fake case, the inscriptions are made in the form of a sticker or letters, manually glued. A fake inscription is easily destroyed by a fingernail.

The inscription on the case of the original

On the latches of the original case, the names of the tool with embossing, squeezing out the instrument. The fake peorator has such inscriptions on latches, as a rule.

See also  How to correctly put the piston on a single axle tractor gasoline

Type of the latch on the original case and fake

When external inspection of the case for storing and transporting the peorator, carefully inspect the gaps between the lids of the suitcase. In the original suitcase, the gaps are either absent or have the same gap around the entire perimeter of the contacts of parts.

Original gaps and fakes

Inspect the back of the case. On the case of the original, the inscription of the word makita is necessarily applied white in depressed letters. Fake cases of such inscriptions do not have.

Determination of the fake during the external inspection of the case of the Makita 2450, 2470

By external inspection of the tool case, you can easily distinguish a fake from the original. The fake of the stator body color is more blue, while the original has more green.

The name on the case of the Makita 2450 peorator is applied by the original method. On the cover of the stator, the inscription is convex, on the cover of the rotor the inscription pressed.

The fake Makita 2450 inscription on the green case is glued and easily removed using the nail. And the inscription on the black case is generally absent.

Fake and original

The fake can be determined and examined by carefully the side handle of the Makita 2450 peorator. On the handle of the original at the site of the pen of the handle, the inscription is applied by pressing the method. The fake has no inscription on the side handle at all.

With a careful external inspection, pay attention to the casting of the plastic parts of the penetrator. The fake has a poor.Quality casting, with torn edges, with traces

Take a closer look at the icons in the area of ​​the mode switch. The original icon has convex and neat. The fake is given by an uneven and torn inscription made with obvious defects.

Makita Cordless Lights | Makita’s Area Work Lights Range Compared | 18v Makita Lights Review

Original and fake the Makita infantry

In the original Makita 2470, the inscription was made by casting on the stator case and squeezing on the rotor housing.

The inscription on the fake Makita 2470 case is made in the form of a sticker, or made separately glued letters. This is easy to detect by pushing the edge of the sticker or letter with a fingernail.

An additional handle of the original Makita 2470 peorator is applied to two inscriptions. One by casting method, the second by extrusion method. Fakes are available without inscriptions at all.

There are original modorators of the Makita 2450, 2470 peorators, in which the inscription is applied on the green housing of the rotor, but under it the inscription made by squeezing is hidden under it.

Original and fake of the rotor body of the Makita peorator

The original Makita peorator on the side additional handle has two types of inscriptions. One inscription made of white plastic, the second inscription is applied by pressing. The inscription made of white is performed separately by the method of casting and already, then painted white. In fakes, the inscriptions on the side handle are completely absent.

Inscription on the handle of the original and the absence of it on a fake

Makita peorators are found, in which a self.Adhesive sticker is glued to the housing. But if you look closely, then under the sticker the inscription Makita, executed by pressing.

Photo of self.Adhesive and inscriptions pressed on the original

Important update from Makita!

Important news! Since May 12, 2021, when transferring Makita equipment to the service center for a warranty repair, the warranty coupon ceases to be mandatory! Warranty service will be provided both according to traditional “guarantees”, and simply according to the check.

Niyaz bayazites Klepka November 2, 2021 14:46

Hello. I heard in one of the Blogs of the store on YouTube that manual, battery tools are divided into generations. When the handle of the tool with round spikes is the first generation, when the handle with vertical, not frequent ribbed lines, this is the second generation, and when vertical, ribbed stripes are frequent on the handle of the manual battery of the tool, then this is the third generation. Is it true?

The manufacturer reserves the right to change the characteristics, appearance, completion of the goods and the place of its production without notifying the dealer. Information on the site is not a public offer

| Denial of responsibility | Contacts |RSS