What inexpensive end saw to choose.

TOP-15 best end saws: rating 2021-2022 by price/quality and which wood to choose with a wood extension

This rating of end saw on our website Vyborcen.COM is a great option to quickly choose the right model. For simpler navigation, we divided the rating into categories:

The end saw is indispensable when performing wooden, plastic and metal blanks. You can not do without it when arranging a house (repair work) and in a carpentry workshop.

But, to achieve the desired results and ease of operation, the tool should be of high quality, reliable and safe.

This ranking contains the best models of end saw for 2021-2022.

Recommendations for choosing a device are given taking into account consumer reviews and experts in the field of construction equipment.

Bosch GCM 8 SDE

  • The kit has a good disk
  • The quality of materials
  • Smooth start and adjustment of revolutions
  • Pure cut
  • Tough and reliable design
  • Moderately heavy

In general, very positive impressions and satisfaction from acquisition. I had to configure the zero corner on the table at first. Was a little shot down. And after that, surprisingly, all other corners fell into place. It really pleased me.

  • Disk diameter: 216 mm
  • The depth of drank 90 °/45 °: 70/48 mm
  • The width draped 90 °/45 °: 312/214 mm
  • The depth drank on the upper table 45 °: 214 mm
  • Functions: smooth speed adjustment, smooth start
  • Design features: laser marker, spindle blocking, the ability to connect a vacuum cleaner
  • Rotation speed: 5000 rpm
  • Diameter of the landing hole: 30 mm
  • Tilt angle: 60 °
  • Turning angle: 47 °
  • Weight: 18.5 kg

When choosing a saw, you should pay attention to the following:

  • The width of the broach is the larger, the more wide the workpiece becomes “on the shoulder” to the device;
  • Cut depth. Determines the thickness of the workpieces;
  • The rotary structure. In most models, the angle ranges from 45 to 57 degrees, but there are options with large angles, mainly professional;
  • The quality of the sole is stamped over time spanning, it is better to give preference to cast;
  • Emphasis. The higher it is, the easier to work;
  • The width of the groove for the disk. It depends on the parameter how high.Quality work will be. With a width of up to 1 cm on the saw, there will be fewer chips and sawdust.

TOP-4 of the best inexpensive end saws

Metabo KS 216 m lasercut

One of the smallest and lightest models in our ranking. Reliably attached to any surface due to wide cast sole.

There is a spindle lock, if necessary, a saw disk can be replaced in a few seconds.

See also  Which potato -cutter to choose for a walk -behind tractor. Advantages and disadvantages

The diameter of the disk used is 216 mm, it rotates at a speed of up to 5000 revolutions per minute. Since this is a desktop tool, a network cable two meters long enough for comfortable work.

All controls are located right in front of the operator and manage the device as simple as possible.

The manufacturer equipped the saw with a laser mark for the accuracy of the cut and backlight, so that you can work even with dim lighting.

inexpensive, choose

A vacuum cleaner connection is available to remove dust and sawdust from the working surface.

  • Pilage power. 1.35 kW.
  • Disc rotation speed. 5000 rpm.
  • Disk diameter. 216 mm.
  • Whether it works with metal. Yes.
  • Weight. 9.4 kg.

Zubrov ZPT-255-1800 pl

Inexpensive semi.Professional model, which is suitable for work not only with wood and plastic, but also with thin aluminum.

Makes cuts of different types: straight, oblique, combined and inclined.

Due to their functionality and power of 1.8 kW, such a saw is often bought for home, a small workshop or trips to objects.

The sizes and weight of the saw allow it to transfer it or transported in the trunk. Flexible settings and ease of use make this model popular among beginners and professionals.

With the help of a laser marker and bright backlight, the accuracy of the cut is provided.

The disk rotates at a speed of 5,000 rpm per minute, it can be tilted by 45 degrees and rotated by 47 degrees.

It is possible to connect a vacuum cleaner to clean the working surface from sawdust and crumbs formed from materials.

  • Pilage power. 1.8 kW.
  • Disc rotation speed. 5000 rpm.
  • Disk diameter. 255 mm.
  • Whether it works with metal. Yes.
  • Weight. 13 kg.
  • Great power indicators:
  • You can work at two different angles;
  • There is a light and a laser marker;
  • Can work with aluminum.

Zubrov ZPT-210-1600 pl

A compact and light end saw that can be attached to the desktop. Connected to a 220 W network, a cord two meters long is quite convenient to work without constraining in movements.

Such an apparatus is suitable for working with blanks of wood, plastic, non.Ferrous metals, is often bought by masters for installing interior and entrance doors.

A 21 cm disk rotates at a speed of 5 thousand revolutions per minute, the engine power is 1.6 kW.

If the load on the engine becomes too large or the saw disc is faced with the material of the inappropriate hardness, then the braking of the engine is activated, the saving tool from the breakdown.

There is a laser marker for accurate marking and a vacuumber, a saw is connected to an industrial vacuum cleaner so that the working surface is clean and nothing prevents the operator from managing the device.

  • Pilage power. 1.6 kW.
  • Disc rotation speed. 5000 rpm.
  • Disk diameter. 210 mm.
  • Whether it works with metal. Yes.
  • Weight. 10 kg.
  • Good power;
  • Suitable for working with various materials;
  • Compact and light, it is easily transported;
  • There is a laser marker.

Japanese Saws Vs. Western Saws | Which Is better for Hand Tool Woodworking

Wortex MS 2116 LM

Another representative of compact end saws, which has a good capacity of 1.6 kW.

See also  How to saw a furniture board without chipping

The engine rotates a saw disk at a speed of 5 thousand revolutions per minute, does not overheat and is stable throughout all work, even if you have to work out a large amount of material.

Such a saw can easily cope with solid wood, various types of plastic, non.Ferrous metals and laminate.

The accuracy of the cut is provided by a laser marker, a vacuum cleaner can be connected to the saw, for this there is a special adapter and a spacious vacuum cleaner.

Due to the low weight, the device is easily located in the trunk, if you need to take it to the construction site.

The angle of inclination and the angle of turn is 45 degrees, the tool is controlled using a large handle of an ergonomic shape.

  • Pilage power. 1.6 kW.
  • Disc rotation speed. 5000 rpm.
  • Disk diameter. 210 mm.
  • Whether it works with metal. Yes.
  • Weight. 11.5 kg.

TOP-8 best ending makita saws for the price, quality and reliability for 2021-2022

The Makita brand line presents a huge selection of end saws, which are suitable for both professional and domestic use. But among the huge assortment of models there are devices in which excellent quality and reliability are successfully in harmony with a democratic cost.

Makita LS1040

The hard design of this end saw is perfect for the exact sawing of not only wooden blanks, but also plastic products and thin aluminum.

In addition, the design of the tool allows you to make oblique sections at an angle up to 45 degrees. The saw has a rotary line that provides reliable fixation and convenient support for the rod.

So that the user is not accidentally injured during operation, the manufacturer supplied the tool with emergency braking of the engine.

There is also a special connector for connecting a vacuum cleaner in the housing, and a vacuumber for collecting sawdust is provided in the kit. To use the saw, it was more convenient, in the front of the case there is a fluorescent illumination of the working area.

Specifications:

  • Very high.Quality housing materials and good assembly;
  • Reliable wear.Resistant design;
  • Comfortable degree scale;
  • Bright and conveniently located backlight;
  • The kit provides a quality disk.

Makita LH1040F

A professional end saw of the middle price category has an acceptable capacity of 1650 watts, so it can be safely used not only for a small repair, but also for professional construction.

The saw is designed for a desktop installation, which greatly facilitates the use of the tool. There is only one speed, but it is enough to work with wooden and plastic blanks.

The device has a disk with a diameter of 260 mm, so using a saw you can make cuts of sufficient height and width (93 and 130 mm, respectively).

With this tool, you can make not only oblique, but also inclined cuts.

For ease of operation, there is a smooth start, and for the safety of the user. Emergency engine braking.

A disk, a vacuumber, a drinker with a cut and a key to assembly tool is provided with a saw.

Specifications:

  • Large and high.Quality disk in the kit;
  • Allows you to make accurate and even sections;
  • Conveniently located lighting lamp;
  • High cutting speed;
  • Extended equipment.
See also  How to choose a cordless chainsaw

Makita LH1040

This universal end saw is designed for a desktop installation, and the power of 1650 W is enough for the sawing not only wooden, but also plastic blanks.

There is only one speed in the device, and the cut can be done straight, at an angle and under the slope. The tool has a 260 mm disk with a diameter.

inexpensive, choose

With its help, you can make an accurate and even drink up to 93 high and 130 mm wide.

inexpensive, choose

The angle of inclination during operation can be 45 degrees.

The manufacturer took care that the device has functions that ensure high safety of operation.

In particular, a smooth start is provided for the exact cut of workpieces, and for the safety of the user. Instant engine stopping.

You can also connect a vacuum cleaner to the end saw and attach a vacuumber to collect sawdust from the work area.

Specifications:

  • High accuracy of cutting, including at an angle;
  • Reliable emergency brake;
  • Acceptable power for the cut of various blanks;
  • High.Quality disk in the kit;
  • The ruler is quickly rearranged.

Makita LH1201FL

This table ending is considered expensive, but its cost is explained by thoughtful functionality and excellent technical characteristics.

Best Table Saws for the Money! (Table Saw Buyer’s Guide)

The tool is universal, and is suitable for sawing blanks made of wood, plastic and thin aluminum. The device provides only one speed of operation, and the power of 1650 W provides high performance. A disk of high.Quality metal is provided with a saw.

Its diameter is 305 mm. Thanks to this, the tool allows you to make accurate cuts up to 62 high and up to 200 mm wide.

The tool also has additional functions that provide high work of work.

The saw can be used even in poor lighting, since the device provides for the backlight of the working area, and the laser marker allows you to make accurate marking on the workpiece.

Smooth start also increases the accuracy of the cut, and the emergency braking of the engine ensures the complete safety of the user during operation.

Specifications:

  • Large and high.Quality disk in the kit;
  • High accuracy of adjustment;
  • Decent power;
  • There is laser guidance of cutting;
  • There is a function of removing dust and sawdust from the working area.

Makita LS0714

At the cost, this end saw belongs to the average price category, although many users believe that its capacities of 1010 watts are not enough for professional use.

The device provides only one speed of work, but the diameter of the disc of 190 mm allows you to work with blanks of different sizes.

The maximum cut height is 52 mm, and the width is 300 mm.

| Denial of responsibility | Contacts |RSS