What oil in the engine of the walk -behind tractor. Why car engine oil is not suitable?

Helpful information

Oil replacement in the walk.Behind tractor is required regularly, the duration of operation and the full operation of the equipment depends on this. The serviceability of all components and mechanisms in the equipment will also affect the competent replacement of lubricating materials and their choice. There is currently a huge selection of oils for motor cultivators. You can focus on a specific brand based on the recommendations of the engine manufacturer. Additionally, the type of lubrication is affected by weather conditions and air temperature. Lubricating fluid in all cases should be of high quality, then there is a good guarantee that the equipment will work efficiently and uninterruptedly.

Reference. Motor oils reduce friction between the elements of the internal combustion engine and the degree of their wear.


What oil to pour in a single tractor and what marking to use depends on the brand of your unit. If you have a diesel unoic tractor in operation, then you need to use diesel, winter or summer, depends on the season. In a gasoline uniform tractor, you need to pour SAE 30 semi.Synthetic 5 W 30 or 10 W 30, if you use it in winter, then 0 w 40.

Pay attention when choosing oil to its viscosity and operational categories. By viscosity, they determine under what climatic conditions the uno.Based tractor will work. They are all.Season. Universal, summer. Tall and winter. Small.

Table of applied motor oils for engines

No The name of the engines Motor oil
API classification Visidity index Type of oil Applicability
one Briggsstratton RS750 RS950 CR750 CR950 I/C 6.0 i/s 10.0 Vanguard SF, SG, SH, SJ and above SAE30 Mineral from 4 ° C to 38 ° C (at a temperature below 4 °, the use of this oil can lead to a problem when starting)
10W-30 Semi.Synthetic from.18 ° C to 38 ° C (the use of oil at temperatures above 27 ° C can lead to increased oil consumption)
5W-30 Semi.Synthetic from.30 ° C to 4 ° C
5W-30 synthetic from.30 ° C to 38 ° C
Vanguard 15W-50 synthetic from.7 ° C up to 50 ° C (only for Briggsstratton Vanguard, I/s 10.0 engines)
2 Yamaha MX175 MX200 MX250 MX300 SE and above 10W-30 10W-40 Semi.Synthetic from.20 ° C to 40 ° C
3 Honda GX200 GX270 SJ, SL or similar SAE30 Mineral from 10 ° C to 40 ° C
10W-30 Semi.Synthetic from.20 ° C to 40 ° C
5W-30 Semi.Synthetic from.30 ° C to 0 ° C
15W-40 Mineral from.15 ° C to 40 ° C (only for the GX200 engine)
4 Honda GP160 GP200 SE or higher 10W-30 Semi.Synthetic from.5 ° C to 40 ° C
SAE30 Mineral from 10 ° C to 40 ° C
5 KASEI (Neva Motorics) 168f (DM163) 168FA (DM196) SG, SF or higher SAE30 Mineral from 10 ° C to 32 ° C
10W-30 Semi.Synthetic from.20 ° C to 38 ° C
10W-40 Semi.Synthetic from.20 ° C to 40 ° C
15W-40 Mineral from.15 ° C to 40 ° C
6 Zongshen GB210, GB22 SG, SF or higher SAE30 Mineral from 10 ° C to 32 ° C
10W-30 Semi.Synthetic from.20 ° C to 38 ° C
5W-30 Semi.Synnetic from.30 ° C to 0 ° C

You can buy motor oil for engines in stores of our trading representatives in the regions, as well as in the Mototechnika Neva shopping and exhibition center in St. Petersburg.

Get fresh information about our company, news and promotions. Indicate your e-mail and we will sometimes send you letters.

What types of lubrication should be used?

There are two types of lubricants for motoblocks:

In this regard, it is necessary to fill in precisely the kind that the manufacturer recommends taking into account the number of clocks of a certain brand of the walk.Behind tractor. Synthetic and semi.Synthetic oils of perfectly suitable for use in motoblock engines have become most widespread in recent years. In specialized stores, the buyer in the assortment offers various types of foreign and domestic production.

Block: 3/6 | Summer characters: 562

How to make the right choice

An important factor when choosing engine oil is its chemical composition. Minerals perfectly reduce the strength of the friction of parts, thereby reducing the wear of the unit. Sustainable engine operation is provided by semi.Synthetic oils. However, they have increased fluidity, which is not suitable for engines with strong wear of elements. Synthetic oils prevent harassment, protecting the engine from breakdown.

Motor oil poured into a single tractor should meet the following requirements:

  • Reduced parameter of kinematic viscosity in a large temperature range. This is necessary to avoid oil fasting during the heating of the motor.
  • Oil should have low coking. This property is especially relevant for power plants equipped with air cooling.

During the operation of the equipment, the lubricant performs several functions at once: cooling, cleaning, lubrication and sealing.

engine, walk, tractor, suitable

DIY oil replacement in a walk.Behind tractor

The first replacement of oil in the engine of the walk.Behind tractor should be carried out after completing the run.In, which is performed at idle under strict control. Second. An hour after the operation of the unit under load.

Subsequent maintenance is recommended every 40 hours of use.

  • Warm up the engine.
  • Install the unit on a flat horizontal site.
  • Substitute a capacity for working out.
  • Open a pouring and drain hole.
  • Drain the liquid.
  • Twist the drain plug.
  • Pour new oil.
  • Close the pouring hole.
  • Let it settled.
  • Measure the level of lubrication with the probe and, if necessary, add.

Start the engine and check the tightness of the joints.

Oil replacement in the gearbox occurs according to the same scheme and in the same sequence.

Oil in the motorblock gearbox. Independent replacement

The standard gearbox of any walk.Behind tractor needs to be lubricated no less than its factory engine. The gearbox is initially a complex structure consisting of several gears responsible for transferring the effort from the engine to the working agricultural equipment bodies. During the operation of the gear gearbox, they constantly contact each other, which leads to a gradual erasure of their teeth. To slow down this process, you need to use high.Quality lubricant.

Check the level of lubrication contained in the gearbox at a certain point in time can be as follows:

  • Clean a 70-centimeter piece of wire, which will perform the functions of the probe;
  • Bend a homemade probe in an arc;
  • Stick the wire through the pouring holes in the gearbox to the end and pull it out.

If the oil stain is at a distance of 30 cm from the lower edge of the probe, then adding oil is not required. Otherwise, the operator should add the missing amount of liquid.

Change the grease in the cold gearbox of the walk.Behind tractor solely if it was found that it was painted in a dark, almost black color. Another indicator of the need for urgent replacement is in lubrication of a large number of extraneous interspersed and solid fractions.

Functions of motor oil

With each technique, including with motoblocks, there is a passport and instruction in the kit for sale. Manufacturers always in the instructions recommend those types of oil that will allow you to serve the technique for a long time and not break.

Wide selection of oils for a walk.Behind tractor

You need to know that during the operation of the walk.Behind tractor, motor oil performs 4 functions at once:

When operating an air cooler engine engine, the lubricants will burn and remains on a hot cylinder, after which a smoky exhaust is formed. The deposition of tarry substances radically affects the pollution of some parts and their lubrication is complicated.

With oil, it is recommended to use anti.Acidic drugs that clean the motor from dirty deposits. Correctly selected oil for a walk.Behind tract according to the SAE classification is the key to durability.

Using a single tractor, you need to choose a lubricant based on the climatic zone.

For example, when using a lubricant type SAE 10W30 at a temperature of 5 ° C and higher, its consumption will be much higher and there will be a high probability of engine breakdown. Summer lubricants are undesirable to pour at air temperatures below 5 ° C. This use leads to a difficult to launch the engine and damage to the cylinder mirror.

One.1 Classification of oil varieties according to the degree of viscosity

It is customary to classify the degree of viscosity of the varieties of motor oil according to SAE (Society of Automobile Industry Engineers).

High.Quality flushing oil MPa. 2

  • Summer varieties. Oils belonging to this category, are used in the summer, have high viscosity and without a letter designation. These include: SAE 20, 30, 40, 50, 60.
  • Winter varieties. These oils are used in the winter and have small viscosity. The letter designation of this variety W (Winter). These include: SAE 0W, 5W, 10W, 15W, 20W, 25W.
  • All.Season varieties are the most popular at present, as they are used both in summer and winter. They are indicated by a double combination: 5W-30, 10W-40.

In addition to differences in lubricants by seasonal characteristics, they are divided by composition into two types:

All the oils are still divided into grease for both 2-stroke and 4-stroke engines. Typically, 4-clock-cooled engines are installed on the walk-behind tracts. In such engines, only 4 strokes must be poured.

This covert and inconspicuous breakdown of the walk-behind tractor leads to a gearbox repair

Checking the oil level with the probe in the oil.Packed opening

The air cooling engine during operation heats up more than the water cooling engine under the same operating conditions. Therefore, pouring fluid should have low evaporation and high thermo.Acidic stability. Also, modern oils should have environmental safety, t.E. The amount of smoke and toxicity of exhaust gases is controlled.

Since waste is often simply burned in boilers or steam generators, they should not contain components that form toxic compounds when burning. In a motor-cultivator that works on gasoline, and has no instructions, it is better to pour the 4-stroke oil of the 5W30 or SAE30 brand.

In winter, winter or transmission oil, for example 0W40, will be preferable. But you will have to pay for such quality. It is not worth saving on this, because high.Quality oil affects less engine wear and its durability.

Transmission oil for a walk.Behind tractor. The choice of a suitable reducer lubrication agent

For lubrication of the gearbox available in the design of the walk.Behind tractor, a special transmission oil should be used. It must comply with a number of important criteria, the main of which is the degree of viscosity of the material. The oil for the gearbox should be viscous enough to cover all the rubbing parts of the mechanism with a thin film. At the same time, in no way, the composition should not be used too dense, since such a tool will not be able to penetrate inside all spare parts available in the gearbox.

Changing engine oil on gas-powered walk-behind tractors

Oil in the motorblock gearbox. How to replace without the help of a specialist?

The replacement of the oil available in the motorblock gearbox is performed almost the same principle as the replacement of the lubricant in its engine. Each gearbox has a drain and pouring hole closed by the corresponding lids.

The procedure for changing the oil in the gearbox is performed according to this algorithm:

engine, walk, tractor, suitable
  • The same-based tractor will need to be motionlessly installed on any hill, in extreme cases, bricks can be placed under its frame;
  • Then, under the drain hole, directly in the lower part of the gearbox, you will need to put a wide container, completely unscrew the upper flood cover, and start unscrewing the plum plug plug. As soon as the oil begins to flow out, the lid needs to be removed completely;
  • After that, you should tighten the drain cover and pour new oil into the gearbox. Using the probe, you will need to make sure that the mechanism contains a sufficient amount of lubricant. The probe is located from the lower part of the lid of the filler hole. To check, you need to tighten the lid, then unscrew it and inspect the probe. If the lower part of the probe plunges into the oil, then it is no longer necessary to add liquids.

Most manufacturers of motoblocks advise changing the oil in the gearbox used by a walk.Behind tractor at least 1 time for each worked out 100 hours. Nevertheless, if the one.Axle tractor is used quite intensively, then, in this case, this procedure will need to perform this procedure every 50 hours of working with it.

| Denial of responsibility | Contacts |RSS