What oil is poured into a chainsaw. How many grams of oil per 1 liter of gasoline are needed for makita saws
The ratio of oil and gasoline for chainsaws of well.Known brands, correct proportions, and also what should not be diluted
The preparation of the fuel mixture is a very important process, on compliance with the correct proportions of gasoline and oil, both gasoline consumption and the service life of the chainsaw. Many are used to interfering 1:50, but this is not right, t.To. The ratio of these two components, all manufacturers have different. Within the framework of the article, we will figure out what the most famous manufacturers are recommended, in what proportions, as well as give an example of how to dilute and cook fuel correctly.
Exclusively motor oil for two.Stroke engines is added to fuel for chainsaws. Oils for four.Stroke engines are categorically not suitable. The reason is that in two.Stroke ICE, the oil burns together with gasoline.
In car and other four.Stroke ICE, it is poured into the crankcase, has many special additives, it is not initially designed to combat. If it is poured into a chainsaw, it will smoke, will not burn out completely and quickly form a thick layer of carbon monoxide, which in the end can disable the chainsaw.
In addition to the general specification “for two.Stroke engines”, the manufacturer of the chainsaws may recommend using on their model oil of a particular brand. It can have special combustible additives and additives extending the service life of the ICE saw.
This is what oil for 2-stroke engines of chainsaws from the famous Champion brand looks like
PAL AUTO SALES : HOW TO START A CHAINSAW (IN HINDI)|STIHL MS 382|चैनसाव आरा मशीन कैसे स्टार्ट करें
In the old two.Stroke engines of the Soviet period, motor oil was also used, as in four.Stroke, for example M8. Old motor oils did not contain such a number of fireproof additives as modern. So that such non.Specialized oil provides sufficient lubrication of chainsaws, increased dosages were used.
When running the engine, 1:20 proportion was used, after 1:25. Large quantities of universal oil, not created under complete burnout, led to rapid hair toxing and sticking piston rings, the formation of a carbon on the upper part of the piston, light of the ignition, in the exhaust windows of the cylinder and a silencer. For the same reason, a spark on a chainsaw candle may disappear.
In advanced cases, windows and muffler could be completely tightened by the car. The thick layer of the carbon on the piston significantly reduced the volume of the combustion chamber.
Modern special oils for two.Stroke ICE provide lubrication of nodes much more efficiently. Therefore, it requires almost two times less than before. From 1:40 to 1:50.
At the same time, the engine remains clean for a long time and serves for a long time, despite the lower supply of mechanical strength in modern ICE in comparison with the old.
We also recommend reading an interesting article about which oil to use for the chain of the chainsaw and how it can be painlessly replaced.
Rating of the best oils for chainsaws
|Nomination||place||Name of product||price|
|The best oils for lubricating chains of chainsaws||one||Stihl Forest Plus||299 ₽|
|2||Oregon 90844s||448 ₽|
|The best motor oils for chainsaws||one||Stihl HP Ultra||180 ₽|
|2||Husqvarna HP 2||680 ₽|
|3||Oregon 90720S||489 ₽|
|4||Hammerflex 501-004||319 ₽|
The chain of the chainsaw glides along the tire with a star and a groove, which includes the legs of the links of the cutting canvas. From friction, the equipment heats up and expands, which leads to slipping and decreasing performance. Sawdust and tar from a tree also slow down rotation. To maintain the light stroke of the chain of the chainships, oils poured into a special container in the tool are produced. From there, it is dripping on a saw blade during the entire process. The operator sets the oil consumption using a special valve. During storage, the substance protects the asterisk and the cutting elements from corrosion.
Stihl Forest Plus
The first place in the oil rating for chains is the product of the German company. The substance is made on a mineral basis and is produced directly in Germany. Oil is packed in canisters of 1, 5 or 20 liters, which is convenient for purchase based on the upcoming volume of work. The last two containers already have a full.Fledged handle for transfer. If the saw canvas is properly processed, then the chainsaw can be stored for an unlimited time, after which there is no depreciation and the equipment is immediately ready for operation.
Experts added this oil to the rating as the best in protecting the chainsaw from wood resin. Lubrication is highly resistant to adhesion and will not allow you to slow down the saw process even with frequent work with coniferous rocks, as well as garden plants that release a large amount of resin on the trunks. The tool will be able to work freely after prolonged downtime. German quality is always on top and has only positive reviews, but its cost remains relatively high.
- Suitable for all types of chains and tires;
- Packing in various containers;
- Comfortable handles for transferring canister;
- Contributes to a decrease in wear;
- Effective protection against resin.
- Thickens in frost below.15 degrees;
- Relatively high cost;
- A wide neck is inconvenient for straight pouring into a chainsaw tank.
This product takes second place in the ranking and is also made on the basis of mineral oils. The manufacturer managed to achieve constant viscosity of the lubricant, so it can be used even in frosts.20 degrees. The oil significantly slows the wear of the parts, and if necessary, it is easily cleaned by the solvent. The goods were developed in the UK and designed to use with any chainsaw. The instruction allows you to fill the oil in the tank, even if the previous remedy remains in it on a mineral basis. In addition to lubricant, the oil also performs the cooling function, effectively taking the temperature from the metal.
Our experts brought oil to the rating as the best to maintain viscosity at high speeds. The manufacturer managed to achieve this effect through the use of additional additives. Thanks to this property, the oil remains on the saw canvas and is not sprayed to the sides, which the owners like the chainsaws in the reviews. Reduced evaporation and viscosity provide economical consumption.
- Does not smoke even when heated to 240 degrees;
- Ergonomic bottle convenient for gas station refueling;
- There is no pungent odor;
- Contains a set of additives to prevent freezing and maintaining viscosity;
- Does not corrode seals and plastic on the chainsaw.
The main brands of motor oils for chainsaws
The leaders in the production of high.Quality lubricants for chainsaws and motorcycle are Stihl and Husqvarna. Their assortment contains both ordinary mineral lubricants for two.Stroke engines and synthetic oils for difficult working conditions. Consider the range in more detail.
STIHL HP mineral lubricant was specially developed by STIHL engineers for use in their tools. That is why the owners of the chainsaw and the STIHL motorcycle is recommended to use this type of oil.
Its color is red, the shelf life in a closed container is no more than four years. Sets in several types of containers, so you can choose the most convenient package for yourself. Not so long ago, a convenient container of 20 grams appeared, which are diluted by one liter of gasoline. For those who rarely use a chainsaw, is the best option. Can be diluted and immediately consumed.
Important: Storing the finished fuel mixture for more than one month is not recommended, t. To. It gradually oxidizes, and the lubricating properties are lost.
STIHL HP fully complies with high European standards.
Another STIHL oil. It has a synthetic basis, due to which it has improved characteristics of combustion, cleanliness and engine protection.
Recommended by the manufacturer for long.Term use in difficult conditions. Ideal for work at low temperatures. HP Ultra does not harm the environment, t. To. The oil spilled to the ground decomposes by 80% in just 21 days.
Sets in two types of containers, 100 ml and liter bottles. The proportion of the finished fuel mixture is 1:50, which means 100 millimeter bottles are enough for the preparation of 5 liters of the mixture. Green color. Shelf life 4 years.
It is worth noting that the STIHL oils before entering the sale pass through the laboratory of the company in which they are checked for compliance with all the requirements.
When developing oils, much attention is paid to combustion of fuel, starting characteristics during cold starting, the ability to biological decomposition, a change in viscosity at different temperatures (information from the official website of the company).
Husqvarna HP 2-stroke
Husqvarna HP oil, like an analogue of the STIHL HP, is also designed specifically for 2x-stroke engines.
According to the manufacturer, this type of oil has additives that compensate for the low quality of fuel, which is relevant for our country. The declared octane number of gasoline at gas stations rarely corresponds to the real.
Husqvarna HP. Semi.Synthetic, green. Packed in liter or ten.Liter containers. The proportion of the mixture is 1: 50, t. E. 20 grams per liter. During the run.In the engine of the saw or when working in the cold, it is allowed to increase the proportion to 1:40, which will give the engine a greater protection and increase its service life.
Today, the market has a large amount of lubricants for two.Stroke engines from different manufacturers. For this reason, answer the question of which oil is better for a chainsaw is quite difficult. Our opinion is worth trusting reliable companies that are Stihl, Husqvarna, Oregon, Champion. It is their oils that will allow to protect the engine of your tool as much as possible and extend its resource.
Unscrupulous manufacturers often mask their products for all known brands (Husqvarna, Stihl, and T. D.). Such oils are of low quality and are able to harm the engine. In order not to be deceived, it is necessary to purchase lubricants from official representatives with the necessary certificates for products. How to distinguish a fake from the original can be found from
How to refuel a saw
A plastic bottle is best suited for refueling a chainsaw. The volume of the container should be equal to two liters if you often use the tool. Smaller capacity should be used when you rarely use a saw.
Dilute combustible and lubricant in a separate bottle. It is necessary to observe the exact proportions indicated in the instructions. It is recommended to leave an empty place in order to mix the liquid well.
Such a mixture should be stored for at least two weeks. Before use, you must shake the bottle. Experts do not recommend diluting a large amount of the mixture at once and keep it for years. The storage temperature should not exceed more than twenty.Five degrees Celsius. If more, then storage periods are reduced.
Long.Term storage of the mixture greatly worsens the traction capabilities of the engine. Freed up with a carpet, the ability of the pistons to a rapid movement is reduced.
The advantages of branded motor oils are super and ultra
Branded lubricants do not need any additives and additional components. It should be borne in mind that fuel mixtures prepared with the use of mineral oils, and their synthetic analogues, it is forbidden to mix.
Which oil for the chain of the chainsaw?
To find out exactly which oil to lubricate the chain of the chainsaw, you will need to study the instructions of its manufacturer. Almost all tool manufacturers recommend filling the tool that is released by the highest adhesive properties. This means that the material used for lubrication of the chain should have a clutch with metal surfaces of the chain and tire.
You need to figure out why grease adhesive properties. During the movement of the chain along the standard tire, the saw element reaches high speed. If, in order to lubricate, use chain oil for a chainsaw, which has low adhesion, then more than half of the inertia fluid will fly from the upper part of the tire without reaching its lower part. As a result, such oil will show itself ineffective, and the tire along with the chain due to constant friction will quickly fail.
Problems of universality
Universal oil for lubricating chains of chainsaws has relatively unattractive operational qualities. It should be borne in mind that even manufacturers of lubricating substances do not indicate their 100% universality.
Incorrect choice leads to the fact that the structure of the structure increases by about 10% and the working resource of the saw set decreases.
The above information indicates that there are no universal options for executing oils. That is why when choosing you need to pay attention to the operational properties, in particular, the temperature regime.
Danger to use oil falsification
The working properties of cheaper fake oils in basic parameters are inferior to corporate developments. The problem is that when counting on the proposed product quality, users operate their chainsaw equipment with full loads.
The use of surrogate oils initiates the accelerated wear of the material part, in some cases it is the basis for the cancellation of factory warranty obligations by service services.
In order to exclude the risks of acquiring falsified goods, consumables are best bought in branded and licensed trade enterprises.
A little about the lubrication of the chain of the chainsaw
Washing is called oil that has served its term in the engine or car gearbox. Many owners of chainsaws, trying to save money, use it to lubricate the chain, which pours in serious repair costs.
The reason for these breakdowns, the presence of metal chips in the development of impurities, which settles in the crankcase of the car, and at the time of drainage from the pallet is drained with it.
OIL LEAKS,- HOW TO FIX. Little tricks Chinese chainsaw
Getting onto the tire, metal chips acts on its surface as an abrasive. Simply put, instead of protecting the surface, development enhances the wear of the tire, the leading star and bearing of the driven star on the tire. The development also affects the chain of the chainsaws, in those places where it bends and increases the risk of breaking the chain mechanism. The use of working out, also increases the likelihood of an oil pump breakdown.
Conclusion: To grease the chain of the chainsaws, you need to use original lubricants from manufacturers. Working from a car engine is unacceptable. In the absence of high.Quality oils, a short.Term replacement of it with clean automobile