What oil to fill in the engine of a power tiller?

What oil to fill in a tractor single axle Oka (gearbox, engine)

What oil to pour into the engine and gearbox of a motorblock Oka should know every owner of this equipment. Oil is a key factor in the flawless operation of the engine and gearbox, under heavy loads, when working the ground. After all, work on the ground. hard work, and the motor equipment operates under extreme loads.

So it is necessary to change oil in your MotoBlock much more often than in a car. The most correct advice on choosing oil is the recommendations of the manufacturers of motor blocks and engines. So let’s turn to the owner’s manual on the Oka and to the instruction manuals on the applicable engines.

Manufacturer of MB-1 Oka power tillers is Kaluga Engine, Kaluga, Russia. Kaluga, ul. Moskovskaya, 247

The official website of the manufacturer of the Oka MB-1 power tiller

Single axle tractor Oka MB-1D1(2, 3)M and its modifications download

Oil to single axle tractor Oka

Volume Type of oil
Engine crankcase 1,3 Car engine oil for carburetor engines M-53/10G1 or M-63/12G1, or any oil that meets the requirements of API: SF, SG, SH and SAE: 10W-30, 15W-30
Power tiller gearbox 1,8 Transmission oil TAD-17I, TAP-15B, etc. GOST 23652-79

Lubricant change intervals in Oka Moto-Block

Gearbox Oil Change Frequency If running-in, first oil change after 25 hours of operation Every 25 hours of operation.Check gearbox oil level. Top up to 1.5 to 2 liters every 50 hours of operation. Change oil in the gearbox
Oka engine oil change intervals (extracts from the manuals of the main engine manufacturers) Briggs Stratton First 5 hours. Change oil. Every 8 hours or every day. Check oil level. Every 50 hours or every season. change oil.
Honda Lifan Check oil level. Each time you use the machine. Oil change first month or after 20 hours of operation, every 6 months thereafter or after 100 hours of operation
Robin Subaru (Subaru) Check the engine oil level and add oil. every time you use the engine (top up to the maximum mark). Change of engine oil: First oil change after 20 hours of operation; after that. every 100 hours of operation

Changing oil in the gearbox of the Oka motor-block

operations and technical requirements Tools, equipment, materials
Drain gasoline from fuel tank and oil from engine Capacity
Place a container to the right of your power tool
Remove the oil drain plug 1 (Figure 6) and with the single axle tractor tilted to the right, pour the oil from the gearbox into the container.
Put the single-axle tractor on its wheels and pour 1.5 to 2.0 liters of oil of the brand shown in the table above into the gearbox. Funnel, container, oil, rags
Screw in the plug 1. Fill fuel tank with gasoline and oil the engine

Oil for engines of Oka motor blocks, recommended by manufacturers.

Engine brand of your power tool Manufacturer’s recommendations for engine oil
summer Winter operating class
Robin Subaru (Subaru) SAE 10W-30. in moderate climates SAE 5W-30 in colder regions Automotive engine oil; grade SE or higher (SG,SH or SJ recommended)
Honda SAE 10W-30 oil is recommended at all temperatures. If you like to use seasonal oil, choose the oil with the proper viscosity grade based on the average temperature in your area SG, SF.
Lifan SAE-30 SAE 10W-30. multigrade
Briggs Stratton Briggs Stratton recommends synthetic oil when operating in temperatures below 0°C. If you do not have synthetic oil, you can use non-synthetic oil Briggs Stratton 10W-30 part number 998208 Note: Synthetic oil meeting ILSAC GF-2, API certification mark and API service symbol with “SJ/CF ENERGY CONSERVING” or higher can be used at all temperatures. Change the synthetic oil on a regular schedule. Air-cooled engines heat up faster than car engines. Use of non-synthetic thickened oil (5W-30, 10W-30, etc.).д.) at temperatures above 4°C will lead to high oil consumption. In case of using such oil check oil level more often. SF, SG, SH, SJ or higher
DM-1-01 (JSC Kaluga Engine) M63/12G1 or M53/10G1 GOST 10541-78, oil that meets the requirements of API: SF; SG; SH and SAE: 10W30; 15W30
DM-1K Red October Instructions M10G, M12G TU 38.10148-85 M63/12G1 or M53/10G1 GOST 10541-78,
See also  Jack for changing wheels on a power tiller

more info about gear oil on your power tiller here.

Video. preparing the Oka power tiller for work

If Oka engine is well tuned, it will consume about 100-200 ml of grease per 1000 km. But consumption may be higher, for example 300-500 ml. This is considered normal. Even at up to 1 liter per 1000 km do not panic. If it gets a lot more oil in your car, get the engine checked or try to change to a thicker oil.

Checking the level for all cars is standard:

  • Warming up the engine.
  • Turn off the ignition and let the power unit cool for 10-15 minutes.
  • Pull out the dipstick and wipe it well.
  • Dip the dipstick in the oil again, take it out and check the level.

Changing the oil in the gearbox of the MB 1d1m10

What oil to fill in the engine and gearbox of “Oka” motoblock every owner of this technique should know. Oil is a key factor that affects the flawless operation of the engine and gearbox, under heavy loads, when cultivating the ground. After all, working on the ground is hard work, and motor vehicles work under extreme loads.

That is why you need to change the oil in your power tool much more often than in a car. The most correct advice on choosing oil is the recommendations of the manufacturers of the motorblock and the engine to it. So let’s turn to the owner’s manual for Oka and to the instruction manuals for the engines.

Manufacturer of MB-1 Oka Moto-Blocks Kaluzhsky Engines, Kaluzhsky Zavod, r.o.o. Kaluga, ul. 247 Moskovskaya str

The official site of the manufacturer of the motor-block Oka MB-1 http://www.kadvi.ru

Single axle tractor Oka MB-1D1(2, 3)M and its modifications download

Oil in a single axle tractor Oka

Volume Type of oil
Engine crankcase 1,3 Motor oil for carburetor engines M-53/10G1 or M-63/12G1, or any oil that meets API requirements: SF, SG, SH and SAE 10W-30, 15W-30
Gearbox of your Moto-Block 1,8 Transmission oil TAD-17I, TAP-15V, etc. GOST 23652-79

Oil change intervals in Oka single axle tractor

Change intervals for the oil in the gearbox First oil change after 25 hours of running-in periodEvery 25 hours of operation.Check gearbox oil level. Top up to 1.5 to 2 litersReplace oil in gearbox every 50 operating hours
Oka engine oil change intervals (extracts from operating manuals of major engine manufacturers) Briggs Stratton First 5 hours Change oil.Every 8 hours or daily Check oil level.Every 50 hours or every season Change oil.
Honda (Honda)Lifan (Lifan) Check oil level each time you use it. Oil change within the first month or every 20 hours of operation, every 6 months thereafter or every 100 hours of operation
Robin Subaru Check oil level and add oil each time you use the engine (top up oil to the maximum mark). Change engine oil: First change after 20 hours of operation; every 100 hours thereafter

Changing the oil in the gearbox of an Oka power tiller

operations and technical requirements Tools, implements, materials
Drain gasoline from fuel tank and oil from engine Capacity
Put the hopper on the right side of the tractor
Remove plug 1 (Figure 6) and with the single-axle tractor tilted to the right, drain oil from the gearbox into a suitable container.
Drive single axle tractor on wheels and pour 1.5. 2.0 L of the oil listed in table above into gearbox. Funnel, container, oil, rags
Screw in plug 1. Fill the fuel tank with gasoline and fill the engine with oil

Oil for engines of Oka motorblocks, recommended by manufacturers.

Engine brand of your power tiller Manufacturer’s recommended engine oil
summer winter operating class
Robin Subaru SAE 10W-30. in moderate climates SAE 5W-30 in colder regions Automotive engine oil; grade SE or higher (SG,SH, or SJ recommended)
Honda SAE 10W-30 oil is recommended at all temperatures. If you want to use seasonal oil, choose an oil with a suitable viscosity grade based on the average temperature in your area SG, SF.
Lifan(Lifan) SAE-30 SAE-10W-30 multigrade
Briggs Stratton Briggs Stratton recommends the use of synthetic oil when operating at temperatures below 0°C. If you do not have synthetic oil, you can use Briggs Stratton non-synthetic oil 10W-30 part number 998208 Note: Synthetic oil meeting ILSAC GF-2, API certification mark and API service symbol with “SJ/CF ENERGY CONSERVING” or higher can be used at all temperatures. Change the synthetic oil on a regular schedule.Air-cooled engines heat up faster than car engines.Use of non-synthetic thickened oil (5W-30, 10W-30, etc.д.) at temperatures above 4°C will result in high oil consumption. If this oil is used, the oil level should be checked more frequently. SF, SG, SH, SJ or higher
DM-1-01 (JSC Kaluga Engine) M63/12G1 or M53/10G1 GOST 10541-78, oil that meets the requirements of API: SF; SG; SH and SAE: 10W30; 15W30
DM-1K Instruction from JSC Red October M10GI, M12GI TU 38.10148-85 M63/12G1 or M53/10G1 GOST 10541-78,
See also  How to set the injection torque on a diesel power tiller

For more information on the oil in the gearbox of your power tiller please click here.

Video preparation of the power tiller Oka

Oka single axle tractor. operation manual

Purchasing any Oka model, the first thing to do is to read the instruction manual for the motorized unit, which has the following sections:

  • Design of the unit (as well as the structure of its components: gearbox, carburetor, etc. д.).
  • Assembly of power tiller Oka, according to descriptions and diagrams.
  • Technical characteristics of the chosen model.
  • Instruction for the first start of the engine (Lifan, Honda or any other).
  • Procedure of correct running-in of the power pack.
  • Maintenance.
  • Troubleshooting a power tiller Oka.

Technical parameters

Parameter Parameter Value
Type of gearbox Chain pump
Overall dimensions, mm., at most 1500x600x1050
Weight of the machine, kg., not more 90
Ground clearance, mm. 140
Transport track, adjustable, mm. 310, 590
Traction force, kgf., not less 100
Speed of movement 1 gear 3.6 km/h 2 gear 9 km/h

New season. Express oil change Luch-MB1

I have been using the Luch-MB1 power tiller for several years at my dacha (I often help my neighbors too). It’s old school, simple and reliable. But even it needs to be serviced regularly (usually once a season), do a little maintenance. He does not need more. Changing the oil in my engine is fast, because I use a simple Idesh hand pump from Aliexpress _hand pump.Pumping oil and diesel perfectly for several years.

Therefore, oil change is easy and easy, we pump out the old (clean and neat), pour fresh (again, with a simple canister from Castrol transmission with a spout).

After that we wipe everything with gasoline “galosha”. The equipment should be clean-)Have a nice summer and harvest!

Oil for VAZ 1111 Oka Gen. 1

GasolineAPI DieselAPI Type Recommended by Manufacturers 1990

How to fill Gear Oils and How to drain engine oil power tiller | My global activities

15W-3015W-20 5W-205W-3010W-30 20W-3025W-2025W-30

SG CD-II mineral, hydrocracking Kixx, G-Energy, Rosneft, Mannol, Lotos, Total, AGA

10W-3010W-4015W-3015W-40 5W-3010W-4010W-30 20W-3025W-2025W-30

SG CD-II mineral, hydrocracking Mobil, Kixx, G-Energy, Rosneft, Mannol, Lotos, Total, AGA

10W-3010W-4015W-3015W-40 5W-3010W-4010W-30 20W-3025W-2025W-30

SG CD-II mineral, hydrocracking Gt-Oil, Kixx, G-Energy, Rosneft, Mannol, Lotos,

10W-3010W-4015W-3015W-40 5W-305W-4010W-40 20W-3020W-4025W-2025W-30
What oil to fill in the engine of a power tiller?

SG CD-II mineral, hydrocracking Gt-Oil, Kixx, G-Energy, Rosneft, Mannol, Lotos

10W-3010W-4015W-3015W-40 5W-305W-4010W-40 20W-3020W-4025W-30

SG CE mineral, hydrocracked Mobil, Kixx, G-Energy, Rosneft, Mannol

SG CE semi-synthetic, mineral, hydrocracking Gt-Oil, Kixx, G-Energy, Rosneft, CONSOL

10W-3010W-4015W-30 5W-3010W-30 20W-3025W-3025W-20

SG CE semi-synthetic, mineral, hydrocracking Mobil, Valvoline, Kixx, G-Energy, Rosneft, Mannol

10W-4015W-3015W-40 5W-205W-3010W-3010W-40 20W-3025W-30

SG CE semi-synthetic, mineral, hydrocracking Kixx, G-Energy, Rosneft, CONSOL

SH CF-4 semi-synthetic, mineral Mobil, Valvoline, Kixx, G-Energy, CONSOL

10W-3010W-4015W-30 5W-305W-40 20W-4020W-3025W-30

SH CF semi-synthetic, mineral Valvoline, Kixx, G-Energy, Rosneft, CONSOL

10W-3010W-4015W-4015W-30 5W-305W-40 20W-4020W-3025W-30

SJ CF semi-synthetic, mineral Mobil, ZIC, Lukoil, Valvoline, Rosneft, Mannol

10W-3015W-4015W-30 5W-205W-305W-40 20W-4020W-3025W-3025W-40

SJ CG semi-synthetic, mineral Xado, ZIC, Lukoil, Valvoline, Kixx

10W-3010W-4015W-4015W-30 5W-205W-305W-40 20W-4020W-3025W-3025W-40

SJ CG Semi-synthetic, mineral ZIC, Lukoil, Valvoline, Select, Kixx, G-Energy, Rosneft, Mannol, Lotos

10W-3010W-4015W-4015W-30 5W-205W-305W-40 20W-4020W-3025W-3025W-40

SJ CG-4 semi-synthetic, mineral Mobil, Rosneft, Select, Mannol, Lotos

10W-3010W-4015W-4015W-30 5W-305W-400W-30 20W-4020W-3025W-3025W-40

SJ CH semi-synthetic, mineral Mobil, Select, Mannol, Lotos

SH CH-4 semi-synthetic, mineral Mobil, ZIC, Lukoil, Valvoline, Rosneft, Select

What oil to fill in the engine of a power tiller?
15W-4010W-405W-40 0W-305W-405W-30 20W-3020W-4025W-30

SJ CH-4 Semi-synthetic, Mobil, Lukoil, Valvoline, Rosneft, CONSOL Mineral

SL CH-4 Semisynthetic Mobil, ZIC, Lukoil, Valvoline, Rosneft, CONSOL

To buy the right oil you need to name. viscosity index SAE

and permissible.API oil quality for diesel or gasoline engine. (Manufacturer to be chosen at your discretion).

Over the years, the engine 1111 Oka gets old (tired), so the parameters of the table are relevant for oil replacement in 2021 and may change over time, taking into account the age of the car.

If the vehicle is driven year-round in a region with a predominantly cold season, get the proper oil viscosity grade from the winter or all-season oil columns.

See also  How much should be between the wheels on a power tiller

KAMCO POWER TILLER FILL Engine oil | How To Fill Engine oil in power tiller | 2019

for gasoline engine VAZ 1111 Oka (1 generation) 1990.в. in 2021, the all-season mineral oil 15W-30 with the quality of SG, and for models from 2007.в. semisynthetic 0W-30 \ SL is well suited for the cold season.

If you drive year-round in a warm region, get the proper oil viscosity grade from the multigrade oil column.

if the car is exploited rarely during the year and mainly in warm seasons, the proper oil viscosity grade should be taken from the column in summer.

If possible, check the oil you have selected against the vehicle manufacturer’s specifications and service intervals.

new oil acceptable oil condition used oil used oil with mechanical impurities used oil in average condition Used oil in poor condition Very bad unacceptable oil condition Oil from an overheated engine

One drop from the engine oil dipstick, you need to drop on a piece of paper and wait 15 minutes, until it is soaked and forms a clear spot. Now compare the sample obtained with the table. Complete instruction.

Engine oil and gear oil filling#sparyman

How much to fill? From 0.6 to 1.1 liter, you need to look at the dipstick or by the technical characteristics, but easier to look at the filler neck: when you see oil there, it means that soon you will stop. I still want to explain (regarding oil): It does not matter how your single axle tractor or cultivator is called, it is important what engine it has.

Draw grease into the gearbox through the fill hole. You can do this with a syringe that has a length of hose attached. Choose a hose so that it fits snugly on the syringe and goes into the fill hole. The amount of grease 70-80% of the norm.

Lighting

The most popular modifications, unfortunately, are not yet equipped with a headlight, but some owners of machines themselves adjust this nuance.

In the basic models, produced by “Kadvi”, there is no light on the power tiller.

It is very easy to make lighting on a motor block, for this purpose they usually use a basic electric generator. Connection is made as follows:

  • The device that generates electricity is connected to the button on the steering wheel;
  • from the button lay the necessary wires to the electrical equipment (e.g. headlamp);
  • The wires are isolated in any way from mechanical damage and water (most often goffer pipe is used).

If the generator power is enough, the headlight will be bright. If there is a lack of power at low engine speeds, the light will go out. Some craftsmen change the generator of a power tiller for a car or tractor one.

How to make a light for a power tiller or minitractor with your own hands:

In any case, even without using the generator you can make a light on the Moto-Block. All you need for this is a 12-volt battery and an LED lamp. The battery can be taken from an electric bicycle or scooter.

It is recommended to put it between the gearbox and the engine. According to the diagram above with the electric generator, connect the battery. Wires from the battery are led to the switch, and then to the headlight or other electrical equipment.

Make sure to insulate the wires.

Running in of the Oka motor block with a Lifan engine

To reduce the risk of damage to moving parts and mechanisms, you should run the engine before starting work in the field.

Before you start the work, you need to fill the tank with fuel and check the oil level. Proper running-in of the engine on the power tiller Oka begins immediately after the first start-up and lasts more than 30 hours. During this period, you can not give heavy loads and work more than 2 hours a day, open the throttle valve more than ¾.

Soil cultivation should also be done sparingly in several passes with a depth of no more than 10 cm at a time. After the running-in period (20-30 hours worked in a gentle mode) it is necessary to drain the used oil completely and pour fresh oil into the engine crankcase.

| Denial of responsibility | Contacts |RSS