What steel do the saw. Wrestling of teeth

Mark steel for longitudinal wood on wood

Why in Russia they fell in love with Machete, Khukri, Paranges or Bolo? After all, in Russia it was very good, in no way inferior to a chopping-in-wheeling cold weapon-Tesak. And as a type of tesakov. Short and light broadswords. How to make a tesak?

Tesac. A broadsword. This is not only an excellent blade weapon, but a full.Fledged assistant in any campaign. He is sharp as a razor, and is strong, like a short sword, reliable and durable if it is made of correct steel, for example, from 9XF Soviet hardening.

The need for Tesak-Palash for a survivor-an-tapeezhnik is obvious, therefore, to list the areas of its use is unnecessary. Separately, it can be noted that the broadsword presented on the video is not a cold weapon, according to the legislation on a separate basis. Its “rocker” from the blade axis above 15 mm. Planting testing in the field revealed all the unique properties of the steel from which the broadsword is made.

Soviet steel of the 9XF brand is worthy of a separate consideration.

The modern steel of this brand cannot be compared with the steel of the Soviet period. Over, since 9XF steel was used to cut other steels, in the Soviet period its qualitative resource was unprecedented. Used it not only for cutting other steels. Yes, 9KF brand steel was not subject to welding. But the high.Quality, temperature and plastic properties of this steel made its choice optimal for use on sawmills in logging. Why?

One detail is important here. Namely, the design of the saws of the sawmills, which led to what was not found to use better steel in them than steel 9XF. So, the design of the R-63 sawmill was specific (this remained to this day)), complex, eternal, but not very convenient to maintain. During a breakdown of one of the cutting saws, it was necessary to reconfigure the entire saw scale again, which led to a simple pilrams, and given that the logging in the USSR was mainly engaged in zones, such downtime did not contribute to the career growth of its superiors. And the delivery of new saw paintings to the wilds was problematic.

steel, teeth
In this regard, there is a curious fact: the R-63 was tuned in some places, as not paradoxically, mushrooms. 9XF canvases were all industrial, the capture in the frame was the same, but the tension clearance had a small backlash. Everything went fine according to GOST, and the resource of the paintings was very decent. But still, sometimes there were incident caused by the imperfection of the human attitude of the saw set. So, the convicts, not having the opportunity to sharpen the steel canvases qualitatively, quickly get them from manufacturers, despite the fact that the plan needed to be overfulfilled, they came up with the use of canvases from steel 9XF, perfectly holding sharpening and incredibly flexible and durable, and under seizures. To lay razors that allow you to configure the frame with a kind of tuning fork: they sought the same sound of paintings in the frame, the frame was launched, the resource of the zone was enormous. All the canvases were tented the same. There were no tension overload on some fabrics, and on other shortages of it. The resource of the work of steel 9XF for wood. Huge.

R-63 pylorams have gone into the past as soon as they stopped producing the famous canvases of Soviet production of the 9XF brand. Modern, declared as saws from 9XF, and do not closely have the properties of the previous steel: they have the composition not the same, and the hardening is not the same, respectively, the characteristics are not the same. In the villages and abandoned sawmills in some places have either whole canvases or fragments of Soviet-made paintings.Craftsmen, knowing the amazing qualities of that steel, collect them as they can and where they can. In villages and abandoned zones. Here are its characteristics:

Here is such a steel of the 9XF brand of the Soviet period of release can be advised to any taiga autonomist to make a casket or knife, since with fantastic flexibility, it has amazing hardness, holds the sharpening of the cutting edge for up to six months (unless, of course, the stones and sand not cut) and does not lose it) and does not lose it their properties at low temperatures of the prima, the Far North, Siberia and the Far East.

Welcome all!Please tell me the normal knife will be from such a saw?

Made from this.The owner of the knife likes.I have ambiguous impressions.Rusts, stupids faster than you expect.(Khim.I did not do oxidation, but in vain).But, in plus, stupid (office paper practically does not cut) trees gnaws with a bang.Everything is only my opinion based on experience, no more.

I made from such a saw at one time. Soft.

It is necessary to roll it. The entire woodworking tool is not too firm, but the steel is good there.

Quote: a normal knife will be from such a saw?

Boy BULLIES Nerd INSTANTLY Learns His Lesson

If you call, I’ll throw it and I have my 5 kopecks: in the photo-a saw for a frame saw, hardness and steel here were already indicated above 9XF, 45-49 HRC.Well, now the main ambush: this one has already dragged, which has already worked as well, released by order, so even 45 units will be squeezed from it very difficult. Only on the re.Jack, and these are dancing with tambourines.I made 4 knife from such a saw, not a single one is even good to clean potatoes.

I wore such a saw on a solider. Showed 44 units, and not a single more. I made it a machete. But, however, an uncle for three months, as it cannot be taken, so there is no review yet. And one acquaintance made a couple of knives from such a saw, and at the same time the descent cuddled the file. For example, I do not understand such softness for a knife.

It will not cement? (Then it makes sense to grind on one side to work with a carbon layer)

Zone hardening will save the father of Russian democracy to cement, in composition steel is normal

Quote: Originally posted by steppehunter: it will not be cement?

Maybe U7A or 6FH, steel is not very, and the canvas is thin, judging by the photo.

Quote: Originally posted by Nika: Most likely 9XF or 6XF.

Quote: Originally posted by SHYR3000: I saw this already well.Worked, which has already been released, so even 45 units will squeeze it out of it. Only on the re.Jack

Quote: Originally posted by nikolaich72:

If not mind, I can be alone and insert your photos into my topic?I did not take your saw at once, and now all cut.

Technical information for disk saws of instrumental steel

Disco wood saw

The disc saw is a rotating cutting tool in the form of a round canvas with many cutting teeth along the perimeter, which is designed for mechanical cutting of wood and materials based on wood.

The disc saw is made of alloy instrumental steel, with the heat treatment, leveling, calibration, wiring and sharpening.

See also  When drilling than to lubricate the drill. Drilling stainless steel in industrial and home conditions

Heat treatment: a disk sawing saw on 44-48 HRC for the thickness of the case up to 3 mm and at 42-46 HRC for a body thickness of more than 3 mm.

  • Alignment: When leveling the disc saw, deviations from the flatness of the surface are eliminated, t.E. So that the axial (end) beating of the disc saw does not exceed:
  • Values ​​of 0.2 mm in a disk saw with a diameter up to 200 mm
  • Values ​​of 0.4 mm in a disk saw with a diameter up to 500 mm
  • Values ​​of 0.6 mm in a disk saw with a diameter up to 800 mm
  • Values ​​of 0.8 mm in a disk saw with a diameter of more than 800 mm

The beating of a disc saw changes in a clamped state near the fastener, and it is necessary to pay attention to the quality of the clamping flanges, which should be a diameter of at least 5x√d saw. Calibration: the appropriate purification of the preliminary load increases the strength of the disk saws, which allows you to increase the supply and thereby increase the accuracy of cutting and the quality of the surface of the cut

Disk saws in manufacture are calibrated for a cutting speed of 60 m/s in lower thickness and 80 m/s in a larger thickness of disc saws. The corresponding turns that the saw is evaluated are indicated on the disc saw

Calibration: the appropriate purification of the preliminary load increases the strength of the disk saws, which allows you to increase the supply and thereby increase the accuracy of cutting and the quality of the surface of the cut. Disk saws in manufacture are calibrated for a cutting speed of 60 m/s in lower thickness and 80 m/s in a larger thickness of disc saws. The corresponding turns that the saw is evaluated are indicated on the disc saw.

Wiring: the size of the wiring (on one side) usually occurs the size of 1/4 of the thickness of the disk body. Only the upper third of the tooth is divorced. The wiring should be symmetrical, otherwise the disc saw begins to deviate in the direction of a larger wiring. Wiring is always done before sharpening, after sharpening it is only controlled and corrected if necessary. When using too low wiring, the disc saw overheats, loses strength and leads to the side. With excessively large wiring, losses from too wide cut, greater energy consumption and increased roughness of the cut surface. For a soft tree, select a large wiring than for a hard tree. For longitudinal cutting, select a large wiring than for transverse cutting. For wet wood, select a large wiring than for dry wood. For a frozen tree, select a smaller wiring than for an unclear tree. With poor condition of the machine, select a large wiring.

Sharpening: for sharpening disk saws, you can recommend a grinding circle of white or gray corundum, medium grain and hardness, with a porous or very porous structure with a ceramic or bakelite base. A circle with ceramic astringent material indicates:

The most common causes of short exposure of sharpening:

Overheating of cutting plates: manifests itself in a change in the color of the tips of the cutting plates arising due to overheating of the material during sharpening. Overheating can occur due to too much pressure (removing a large amount of material) of a grinding circle on the covered surface, due to the use of a too hard grinding circle, too fine grain of grinding circle, improper mounting of the tool or intensive sharpening without cooling.

What steel is the circular saws from

Today, work on metal cutting has become an integral part of the activities of those who are engaged in construction and repair work. For example, various disk metal saws become popular tools and best assistants.

We pay attention to the mechanical version so that the work is more effective, namely: to manual electric saws.

With a disk electric saw is much easier to work. It is equipped with carbide high.Floating disks, which have a high level of resistance to destruction. When it is necessary to carry out wood or metal, such a tool will become the most suitable. The saw allows you to make a narrow cut and at the same time form a small amount of shavings.

Important! For security purposes, the processing area is closed with a special casing.

Disk saws create more noise than other machines. However, changing the speed of the saw allows you to perform curly and angular cutting.

Metal disks for circular saw

In order to choose high.Quality discs, you need to read the marking. The packaging always indicates the permitted speed of rotation, landing dimensions, and the direction of the cut. What should be indicated without fail?

  • Rotational speed
  • The number of teeth
  • The width draped
  • Direction of rotation
  • Landing size
  • External diameter
  • Purpose
  • Life time

Metal saw

Do not look for the so.Called universal discs, because in fact they do not exist. It is impossible to choose such that it perfectly suits and does well the cut of both solid and soft material.

For metal work, carbide saw circles are best suited, they have a high.Quality base and cutting teeth. The number of teeth and segments affects how quickly the workpieces will occur. The peculiarity of segments is the presence of special attacks.

We can say that they play the main role in the cut. Telfram. Cobalt or carbide.Wolframic alloys are used. On many brands you can see slots. They are specially made to eliminate heat.

And this, in turn, increases the life of a carbide disk.

steel, teeth

Disk saw on aluminum

When choosing a tool model, you must definitely pay attention to the size of the disk. The saw disk allows you to quickly and effectively cut the sheets and pipes made of aluminum, process plastic and products from colored metal.Plastic.

This tool allows you to perform cuts of larger blanks. It has other advantages, among which:

  • High speed;
  • Cuts very subtle and neatly;
  • Performs corner cutting;
  • Differs in the availability of equipment (300 mm saw);
  • Compact, it is possible to carry from one place to another.

Carefully! When cutting the profile, overheating is undesirable, otherwise the saw will deviate from its trajectory.

steel, teeth

Simon Cowell CAN’T BELIEVE His Eyes! Impressive Auditions on AGT | Got Talent Global

The essence of his work is to melt the material in the place of cut with the help of a special shape of cutting teeth. Disks make it possible to achieve an acceptable ratio of resistance and resistance to the appearance of small cracks with great rotations. This cutting method is a cheap option for the manufacture of steel blanks.

All types of saw discs by the number of teeth can be divided into three groups:

A high.Quality disk saws accurately and accurately, the service life is quite long, but it also costs a thing. To do this, you should find a reliable supplier. Do not choose cheap equipment, which will lead to disappointment subsequently. It will quickly wear out, and cutting will be much worse than expensive equipment. It is important not to forget to hide the saws in time, then your unit will last you longer.

What steel do the saw

The stores present a huge selection of knives. They have different design, purpose, are carried out using modern technologies.

Today, materials for production will like more metal more, but ceramics are of particular stiffness. Such knives are very sharp, Long time do not need sharpening, but rather fragile.

When the chip is formed, it is impossible to restore the previous type of knife, especially on their own.

The knife blades are made of hardened steel so that it is convenient to use.

To make it pleasant to work in this case with a knife conveniently cut, it should not sit in your hand safely. With a comfortable handle, you can use it for a long time. However, it is not often possible to find such a knife in the finished form.

Then it is performed independently. The features of the palm are taken into account here, the length is not the shape of the cutting blade. Knives should be made of hardened steel.

See also  What Oil to Dilute with Gasoline for Gasoline Saw

Therefore, home.Made knives from the saw will fully meet the requirements.

Claiming options

Homemade knives are made from many metal parts, which are used for their intended purpose so that, since they are unusable.

Among the details where they will make home.Made knives, they distinguish several:

  • Worn connecting rods of a motorcycle, where they make a set of knives of various lengths;
  • Bound keys with one broken end;
  • Crutches used in laying rails;
  • Discs of the circular saw of various diameters of not thickness;
  • Damaged hacksaw canvas of a pendulum saw.

With certain skills in forging, a knife is made of a metal thick cable, a chain from a home unit. For this purpose, a chainsaw is optimally suitable for you. Its chain is quite durable, and a home.Made knife will turn out like Damassian knives.

If circular saw It has a large disk diameter, and its damage is minimal, then with its use two homemade knives can be obtained. Disks have a significant strength of metal metal, since the saw is used for various purposes a long time.

Materials and tools

To make a home.Made knife, the following equipment will be required:

The schedule of the dependence of the thickness of the knife on the hardness of steel.

Knife

If it is decided to use the canvas from a hacksaw as a metal workpiece, it is necessary to take the canvas from the pendulum saw. This saw performs work on metal of large thickness (for example, rails) and meets the requirements of stiffness and strength. The size of such canvases ranges in the framework of length/width/thickness, 400-500: 30-40: 2 mm. The color is determined by the type of production processing that the saw was subjected to, and there may be black or gray.

Before starting the manufacture of the knife blade, it is necessary to check the integrity of the metal. This can be done by ear, but this requires certain experience and skill. A whole canvas makes a loud sound, damaged. Deaf. If it is difficult to do this by ear, then it is necessary to examine a thoroughly metal workpiece carefully.

The angle of inclination of the blade should be 20 degrees.

In this case, this should be not only the blade, but also the allowance, which will then be hidden in the hilt. After that, on a metal.Designing machine (or a carefully fixed corner grinder with a circle), it is necessary to gradually and carefully remove the excess.

You need to do this slowly, since the metal can heat up. To cool and continue to work, take a bucket with water. This container should be enough for the workpiece to be completely in the water. The contours of the blade are performed by the same machine. It should be borne in mind that a feature of this steel is that with a sharp change in the temperature of the metal in it, the smallest cracks can form in it. This can lead to the fact that even with a small effort the knife breaks. Therefore, it is impossible to overheat the metal during its processing. The tip should be carried out especially carefully, because when the thickness is reduced, the metal heats up faster.

The main characteristics of the strip saws

Obtaining high.Quality cut and the duration of the operation of products depend on the accuracy of the selection of parameters such as step, wiring and tooth shape

An important characteristic of the strip saw is a tooth step determined by the number of saws of a saw per inch (TPI). The step of the tooth can be constant or variable

The permanent is used when working with harvesting continuous section in industrial volumes, the alternating provides minimal vibration and high cleanliness of the cut.

For products with a constant step, its value is from 1 to 32, with a variable step. 10/14. 0.75/1.25. Below are the tables of the recommended size of the pile step for cutting rolling with a solid section:

And recommended step sizes for working with profiles and pipes:

However, PIL manufacturers often offer their own recommendations for working with whole blanks, profiles and pipes. They should be guided by the selection of saws to solve certain problems.

The next important parameter is the angle of turn or tilt of the tooth relative to the plane of the canvas or, more simplified name, wiring. The free stroke of the canvas, vibration, noise, cross.Section of blanks and the ability to work with thin materials depend on this. There are the following main tilt options:

  • Standard. Tooth with the left inclination, then a tooth with the right inclination and a straight tooth. The most commonly used wiring for cutting blanks of all steel grades.
  • Variable. Left, right and reference tooth. Provides minimal noise and vibration, used to work with soft materials.
  • Wave wiring. For cutting thin.Walled rental.
  • Combined. For pipes, profile rental with alternating section and bags.

The capabilities of the canvas for the band sawing machine for metal depend on the shape of the tooth. There are the following main forms:

  • Normal (n) with the front angle 0 °. Designed to work with high.Carbon alloys, for a thin profile and rental with alternating section.
  • Hook (h) with a front angle of 10 °. For thick.Walled pipes and continuous blanks.
  • RP with a front angle of 16 °. Work with solid and especially solid blanks.
  • Master. An angle of 10 ° and 16 °, the presence of a polished chamfer located in the longitudinal direction.

Pitch size for cutting continuous rolling

Constant step A variable step
Diameter, mm Toices per inch Diameter, mm Toices per inch
to 10 fourteen up to 25 10/14
ten.Thirty ten fifteen. 40 8/12
30. 50 eight 25. 40 6/10
fifty. 80 6 35. 70 5/8
80. 120 4 40. 90 5/6
120. 200 3 fifty. 120 4/6
200. 400 2 80. 150 3/4
300. 700 1.25 130. 350 2/3
600 0.75 150. 450 1.5/2
200. 600 1.1/1.6
500 0.75/1.25
Wall s, mm External diameter D, mm
20 40 60 80 100 120 150 200 300 500
2 fourteen fourteen fourteen fourteen fourteen fourteen 10/14 10/14 8/12 6/10
3 fourteen fourteen fourteen 10/14 10/14 10/14 8/12 8/12 6/10 5/8
4 10/14 10/14 10/14 8/12 8/12 8/12 6/10 6/10 5/8 4/6
5 10/14 8/12 8/12 8/12 6/10 6/10 5/8 5/8 4/6 4/6
6 8/12 8/12 6/10 6/10 5/8 5/8 5/8 5/8 4/6 3/4
eight 8/12 6/10 6/10 6/10 5/8 5/8 5/8 5/8 4/6 3/4
ten 6/10 5/8 5/8 5/8 5/8 4/6 4/6 3/4 3/4
12 5/8 5/8 5/8 4/6 4/6 4/6 3/4 3/4 3/4
fifteen 5/8 5/8 4/6 4/6 4/6 4/6 3/4 2/3 2/3
20 4/6 4/6 4/6 3/4 3/4 2/3 2/3 2/3
thirty 3/4 3/4 3/4 3/4 2/3 2/3 2/3
fifty 2/3 2/3 2/3 2/3

When sawing the pipes lying nearby, use values ​​with a double wall thickness

Choosing the best hacksaw for wood, rating 11 models by quality

What are the differences in high.Quality and bad hacksaw? Low quality can be seen on poorly sharpened teeth.

Sometimes manufacturers deceive, and make the teeth in appearance seem sharp, but after a few works they will dull. A good hacksaw, on the contrary, is made of such steel that will hold the sharpness for a long time.

The review draws a rating of the best hacksaws for wood work, the features of the choice and function are indicated.

Purpose

The goal of a knife.Haired woman. Cut wooden materials. Canvas, teeth, handle are included. The canvas is a working part of the tool. Wood sawing is divided into several types.

The first is the separation into parts of dry materials, that is, boards, logs, plywood and other rubbish. The second type is the pruning of the garden, ennoble other trees.

The following materials are also processed:

Criteria for choosing a hacksaw on wood

When choosing, you should be guided by the following criteria:

  • Dimensions and shape of the teeth, as well as the length of their step;
  • Handle configuration;
  • What material can saw (oak, cherry, brushwood);
  • The length of the canvas.

The shape of the handle will affect the comfort of the work. This parameter is the main one in intensive classes. In order not to grate the corns, use gloves.

Length and size of the canvas

The average length of the canvas is from 350 to 600 millimeters. The choice depends on the thickness of the tree itself, which you plan to saw. Try to choose the average length. For example, if you saw too short canvas, then spend more time on the cut, and if too long, it will begin to spring after half the traveled path.

See also  There is a steel magnet if we saw it in half

The length should be 2 times larger than the diameter of the workpieces. In this case, the minimum workpiece thickness should be a step of three teeth.

The size and shape of the teeth

The whole process of work depends on this parameter. There are hot/irreparable teeth. Uncassed cloves can always be sharpened if the owner has certain skills. Hard teeth have greater reliability. After wear, their sharpening is impossible.

Teeth are divided into small, medium, large. The speed/accuracy of the cut. According to this parameter, the degree of efficiency of the cut of wood is determined. The high accuracy of the work is provided by a small tooth. To quickly cut the materials, a large tooth is perfect, however, accuracy and quality will suffer.

For products of the smallest sizes, teeth of 2 to 2.5 mm in size are used. They provide high accuracy of the saw.

Medium.Sized teeth received dimensions from 3 to 3.5 mm. Large teeth can be sawed logs. Their length is from 4 to 6 mm.

Differences of the incisors in appearance

There are several types of wood hacksaws. They are determined by the appearance of the teeth:

  • Performs the functions of longitudinal sawing. With such teeth, trees are cut along the fibers. Teeth will be in the form of a oblique triangle.
  • For dry wood, a transverse hacksaw is used.
  • Triangular teeth are suitable for rare use. These teeth regularly change with semicircular. Suitable for mixed wood sawing.
  • For high speed, it is recommended to purchase a saw with teeth in the form of a trapezoid. The owner will cut it quickly and not get tired.

Design

The design can be of a variety of configurations and sizes. So, they highlight the following designs:

  • Narrow. Saw small blanks that have a thickness of no more than 10 mm. Also cut out curved parts and branches in the garden. A canvas with narrow triangular teeth is installed here.
  • Standard hacksaw. Any teeth can be installed. They are equipped with interchangeable sets of canvases. This is convenient when performing carpentry.
  • Hacksaws equipped with a leap.
  • Khosuovka with award has two pens. A little reminiscent of the shirts. Designed for cutting grooves in wood.
  • The canvas in the form of an arc is represented on a knife.Like hack. It helps a lot where you need to perform complex cuts.
  • Folding hacksaws with small teeth are suitable for lovers of outdoor activities. Fans of tourism/fishing positively evaluate them. Other species are light/compact. Outwardly resembles a folding knife.
  • Garden manual saw.
  • Two.Handed saw for two people (transverse).
  • Chain manual saw for tourist campaigns.
  • Electro.Fire.

Type of the handle

This parameter determines the convenience of working with the tool. If the handle is made of two parts, then the use will be less comfortable, since it does not have a sufficient level of rigidity.

Universal or manual saws are equipped with handicraft handles, where in the process the canvas is required in the process. Next, consider what kind of hacksaw on wood will be better.

Popular models

The best new wood hacksaw models are presented below.

Gross Piranha 24106 450 mm

High.Quality hacksaw at an affordable price. It can be purchased for 900. The model is equipped with a fixed handle. Differs in hardened teeth and Teflon coating.

The length of the canvas is 450 mm, and step 11-12.

One of the cheapest wood hacksaw. Its teeth hardened, and their step is 11. Equipped with a fixed handle. Only a tree is processed with a canvas of 500 mm long. Dawed with hardened teeth received a longitudinal-transverse direction. There is also a 3D sharpening function.

Small teeth allow you to do the most accurately as possible. Also processes a tree. Step of teeth 11 points. Tempered teeth received a longitudinal-transverse direction. Fixed handle adds reliability when working. Fabric length 450 mm.

Great option for hiking. Fabric length 250 mm. This is optimal for small work. Can process laminate, wood and plastic. It will cost only 450. Ideal for tourists.

A fixed handle and a 3D sharpening function is a typical characteristic of modern hacksaws. Suitable for smooth and accurate work. Intended only for wood processing. 400 mm long canvas is suitable for small and medium types of work. The direction is transverse.

Types of manual wood saw

Option #1. Narrow

A small narrow saw is a design that consists of a straight.Line flat canvas and a handle. Subtle work is performed by it: through cuts, cut curline parts.

This type of tool is designed for cutting wooden blanks, the thickness of which does not exceed 8-10 cm, drank small branches and small works in the garden

In the manufacture of narrow models, manufacturers install canvases with triangular double.Sided teeth, or with parallel sharpening. The disadvantage of the tool is that when pressure in the process, the canvas can deviate from a given direction.

Option #2. Ordinary

A standard hand saw can be equipped with any type of teeth and is often equipped with interchangeable canvases of various types and execution.

steel, teeth

To be able to saw off the blanks at a certain angle with the help of a standard manual saw, you have to purchase special risers

But despite the declared universality of their application, the saw of this TIA is not advisable to use in the manufacture of furniture.

Option #3. With a teacher

Both narrow and ordinary saws with increasing stiffness of the processed material are prone to bends. In these cases, it is effective to use canvases equipped with a leap, which acts as a kind of rib of stiffness.

Manual hacksaws equipped with a leap, are designed to create shallow cuts in a wooden surface of any thickness

The presence of a lining does not allow the saw to make a depth section more than the width of the canvas, since it prevents the passage of the cutting canvas further into the tree.

Option #4. Luchkov

Luchkov.Type saws are more bulky devices that acts as an analogue of an electrician.

The main purpose of the saw of this type is the creation of an accurate cut when working with surfaces located at any angle

Thanks to the thoroughness of the structure and threaded joints of the handle of a beam type saw, they can easily overcome knots, performing the cut along the radii and curved patterns.

Depending on the purpose and constructive solution of the saw, there may be:

  • Sweeping. For longitudinal cutting;
  • Transverse. For sawing blanks across the wood fiber;
  • Exile. For cutting holes, performing rounding and curly cutting;
  • Shipy. For cutting connective spikes, as well as cutting on the workpiece of simple geometric shapes.

Only a hare of a ray.Like type can cut the material along and down, drinking blanks with complex lines and performing work alone without involving an assistant.

What are the discs for the circular saw, and how to choose them correctly?

Circular saws or disk. A hand.Type tool that can be performed by a transverse and longitudinal incision of various materials. The main element of the design of this tool is an iron disk with cutting teeth on the sides. Systematization of saws what remains to make our client in the economic market circular saws shared by their purpose. In the middle of them:

  • Models used for metal cutting
  • Used for transverse cutting
  • Saws for longitudinal racks of wood
  • Models used for cutting slab materials, including laminate

It doesn’t matter what kind of disk saw can relate to different depths to models. In the middle of the great assortment offered by manufacturers, four types are distinguished:

| Denial of responsibility | Contacts |RSS