What tiles for porcelain tiles are needed.
How to choose manual tile cutter. User reviews and the most important thing about cutting tiles at home
In working with facing materials, the main thing is their proper adjustment. In some cases, you have to change the dimensions of the tile. In others. Cut more complex circles and excavations for pipes. To this end, home masters use angle.Grinding equipment. But if not only speed is important, but also the accuracy of the process with a minimum of dust, it is better to immediately decide how to choose a tile cutter for home use.
For housework, when only a few times a year you need to cut tiles, experts recommend manual models. Their main advantage is simple use, and it is also worth noting the enhanced design of the tool. Thanks to this device, the accuracy of processing materials is over 85%. In this case, the thickness of the tile. From 1.5 to 2 cm. To adjust 8 mm products, professional devices up to 400 mm long are more suitable for.
What tile cutter to choose, roller, mechanical or, perhaps, the model on bearings, depends on the thickness of the processed products. For example, to process the glazed tile, on which dust and dirt are almost not visible, experts use roller tools. For terracotta materials. Mechanical counterparts, and for processing an ultra.Resistant tile at least 1.6 cm thick, models on two bearings are used. They provide softness, due to which the probability of marriage does not exceed 2%.
Difference Between Ceramic and Porcelain Tiles | How to identify? Use of Ceramic and Porcelain Tile
In the market of the tile cutter of the manual price, depend on the strength of the frame, cutting elements, size and weight of inventory. If we talk about the types of incisors, it can be rollers or diamond rings. They do not cut the material through and through, but make neat cuts along which tiles breaks. It is important that the base of the tool is tough. Otherwise depreciation during work cannot be avoided. Manual tiles up to 200 mm long are needed for processing wall products. For installation of floor coverings, you will definitely need a tank cutter of a manual 600 mm.
- Significant energy savings. Such models do not need network power, so it is convenient to use them both in rooms and in the open air. What, alas, you can’t say about electric counterparts
- Small sizes that contribute to the rapid processing of materials somewhere on the floor or even on the edge of the table
- The ability to move the tool around the rooms. It weighs no more than 9 kg, which means that there can be no doubt in its practicality
Professional manual tile is designed for processing materials, including glass, with a thickness of 8 to 10 mm. You can work not only on the table, but also directly a canopy. However, if the plans include the adjustment of facing materials at an angle of 45 degrees, it will not be superfluous to find out how to choose an electric tile. Unlike a manual analogue, it provides maximum length and depth of incisions, and without damage to the edges. The processing of one plate lasts from 45 to 60 seconds, which is three times faster than when using manual inventory. The probability of marriage is minimal even for the builder of the amateur.
Which tile cutter is better. Manual or electric
According to the principle of action, all tiles are divided into two types:
Electric models for work resemble an angular grinder. The tool is equipped with an electric motor, which at high speeds through a gearbox rotates a cutting diamond disk. Teling cutters are highly performance, but a lot of dust and dirt appears during cutting.
The electric tool is highly performance
Manual tools differ in the simplicity of the device
Which of the tiles is better, it’s hard to say. It all depends on the volume of work performed and the type of tile. If you need to lining a few square meters at home, a hand tool is enough. However, here, too, you need to choose a suitable model. Normal hand.Type tiles cope with classical ceramics. If you need to cut large and thick plates, you need a professional tool.
It is better to buy electric models for a large amount of work. However, there are also nuances here. Manual electric stump cuts are more suitable for home use. At a large construction site, machines are in demand.
Important! At home, if desired, thin tiles can be cut with ordinary glass cutter. For thick material, it is optimal to use an angular grinder with a diamond disk. However, both options have a great drawback: the cut will turn out to be uneven. In addition, a lot of dust flies from under the corner grinder.
The video shows cutting tiles:
How to choose the optimal power of an electric tile cutter?
In such devices, power primarily affects the torque (force when rotating the saw disk). That is, the more powerful the engine is in an electric tile, the easier it will be to cope with a dense thick tile, and the cutting depth will be larger. In fact, the more powerful the engine, the more with a large disk the device is capable of working. At the same time, excess power is not always good, as it affects the dimensions and cost of the unit. Conditionally, all tiles can be divided by power into three categories:
- Up to 1000 watts. Mainly inpatient tiles with the lower disk feed. The maximum disk diameter for them is 200 mm.
- From 1000 to 2000 watts. Portable and stationary with the upper drive of the disk. The maximum disk size is 300 mm.
- From 2000 watts. Mainly stationary with the upper drive of the disk. Over, most devices have a 400-mm disk.
Often, buyers prefer devices of the first category, since in most cases they meet the needs of consumers, but are relatively inexpensive. For repair in the house, a tile cutter with a capacity of 1000 watts with a lower disk feed may be enough. For example, many buyers with approval speak about the model of the bison EP-200-1000n with the lower disk feed and the ability to work with nozzles with a diameter of up to 200 mm.
Devices from the second category should be considered only if you need to make oblique cuts at an angle. Naturally, only some portable and stationary tiles with the upper drive of the disk can do such work.
The third category is intended for professionals who are launched marble and large.Sized porcelain. The price tag for such devices varies from 40,000 to 250,000. However, if your choice of tile cutter still fell on a device from the third category, then we recommend buying an Einhell RT-SC 920 L 2200 W model with a 300 mm disk and effective water cooling.
How to choose a tile cut in an inexpensive cut depth? This indicator directly depends on the diameter of the saw disk. The larger the working disk, the greater the thickness of the tiles it is able to cut out (here much depends on the design features of the device). Simply put, first it is worth determining what thickness maximum you will need to cut the tile and then buy the appropriate device.
Naturally, the depth of the cut will be much smaller than the diameter of the disk. For example, consider the stationary tile cutter Elitech PE 800/62p. It works with discs with a diameter of 200 mm, but the cut depth is at an angle of 90 ° 36 mm, and at 45 ° 30 mm. This means that the device is suitable for laying facing ceramic tiles in the apartment, but it will not be able to cut the paving stones with a thickness of 40 mm or more.
It is also worth remembering that the concept of “cut depth” in devices with the lower and upper feed of the disk differs. If for units with the upper feed of the disk “cut depth”. This is really the value on which the disk lowers into the tile, then for the device with the lower presentation. This is the distance to which the disk peers out of the table. It was structurally so that with an equal diameter of the saw disk in devices with the upper feed, the cut depth will always be larger than that of devices with a lower presentation. Also, tiles with the upper drive of the disk allow you to cut niches and holes in the tile, which is useful if you need to put a square.Type switch or socket
Mechanical features of tile cutters
The dimensions of the bed directly affect the size of the tile can be dissolved on a particular machine. The larger the table, the more the workpiece will pass under the disk, or the longer the stroke will be at the spindle node. Sometimes the workplace can expand at the expense of additional folding tables, drawing supporting straps, which significantly increases functionality and comfort without compromising the machine for the machine. Thus, the indicator of the size of the tile, which can be cut by a tile cutter, is relevant. Usually indicate the length of the direct sawing and the cutting length of the diagonal (if the workpiece can be installed). For the console machine, “sharpened” under the tile, 600 mm is considered to be parallel to the side and 45 mm diagonally considered good indicators. Stores with a bridge characterize the length of the cutting head, and there may be very impressive numbers: Husqvarna TS 100 R-1000 mm, Rubi Diamant DS-250 1300-1320 mm. But the length of the cut does not mean that the same size can be fixed on the table, these numbers are slightly smaller. Everything that is larger, but fits on the platform, can bloom without regular fixation.
Rubi Diamant DS-250 1300
But! Often manufacturers limit the load on the bed and indicate the maximum allowable mass of the workpiece depending on the area of the support. This moment can greatly narrow the functionality. Be vigilant.
It is very important how durable and stable, because it is on it that all the main marginal and fasteners are based. Only high.Quality materials are used here. Stainless steel, aluminum alloys. For console tiles, non.Slip overlays from elastic materials are often used.
It is also useful to pay attention to the ease of cleaning of the table, which depends on the nature of its penetration, the features of the outer surface (smoothness, longitudinal corrugation). It is very convenient if the platform is easily removed (Husqvarna TS 230 F).
Features of water supply
With tile cutters in which the motor is located under the bed, everything is simple. There is a special reservoir, it must be roomy so that it does not have to add a coolant too often. However, too much trough can be difficult to extract from under the machine without raising it (the problem is if the unit is fixed on the workbench). And this should be done periodically in order to replace too dirty water.
In stone.Cutting machines with the upper engine, water is supplied to the working area so that it does not clog and fail, filters are installed in front of the supercharger (there are self.Cleaning). It is very useful if the nozzles that spray the liquid are adjustable if they can be directed to the desired point (Dewalt D24000). It is important to understand how efficiently worked out water is discharged and captured. Here, protective screens and suspended capacities (CEDIMA CTS-81), drawer trays (Bosch TC10–07 10 Inch), technological channels and large pederation on the table are helped.
The user manuals often indicate the volume of water supply (liters per minute). It is obvious that it is better to have some supply and choose a machine with a stronger circulation. Over, it is adjustable as on Dewalt D24000. A large plus is a large collector for water, sometimes compartments are arranged in it to collect sludge. Excellent if the water tank is maximum capacity.
Features of mobile nodes
Any tile cutter should be able to saw at an angle, this is achieved by an inclination of a power plant or a support site. Many machines can be exposed for fecetting underwear (up to 45 degrees), but in this case, intermediate installations are not very reliable. Some cars have an intermediate fixation threshold. At a mark of 22.50. In certain cases, this is simply an indispensable function.
To ensure a decent quality of processing, a spindle node or a movable trolley must move very stably along their guides. Naturally, the supporting device must be impeccable in terms of quality. Aluminum (manufacturing technology with elements of extrusion) is used for bridges, which is not amenable to the twisting forces (Husqvarna TS 73 R), for support and smoothness. Steel bearings combined into a complex system.
Husqvarna TS 73 R
A special advantage is the presence of a control resistance adjustment (you can choose the desired smoothness of the movement). It is good if the carriage (a movable platform) or the head of a bridge tile cutter can be stained in a certain position, for example, to perform repeated cuts or submersible work. In any case, no backlash in the supporting devices should not be.
A few useful little things
As usual, in conclusion, we recommend that you pay attention to seemingly minor things. Let’s just list some nuances to choose easier:
- The stability and convenience of spatial adjustments.
- Detailed graduation, reliable protective coating of lines and scales.
- Good visibility of the working area.
- The presence of a guide slot, laser sign of the cut line.
- Long length, network cable quality.
- Convenient control handles.
- Quick protective casing.
- Bizstrmental disk replacement.
- The latitude of the product configuration.
- Optional opportunity to change the size of the equipment.
- The presence of a folding bed.
- Removing “semi.Automatic” legs with height adjustment.
- Wheels for transportation with fixation in a stationary position (brake).
- Handles for carrying, loading/unloading tools.
In a word, take a look at the tile cut, as at the holistic organism, try to take into account everything. Pullify in choosing a model from the specifics of your work, focus on size and configuration of blanks, whether it is a tile, roofing tiles or clinker brick.
What are the tiles, and which one to choose?
First of all, these tools can be divided into manual and electrical. The principle of division is very simple. If the cutting equipment of the device is driven by the muscle strength of a person. This is a manual type. If electricity is involved for this, the device refers to electric.
The principle of device and action
This section can also have their own separation, but we will still try to go to the optimal design faster without linger on the little things.
The principle of operation of such devices is not much different from the principle of cutting glass. That is, at first, according to the marking on the front side of the ceramic tiles with an effort, a high.Strength cutting element is carried out. This element is made of special alloys or has an attack with a diamond cutter. Due to this highest strength and applied force, a deep scratch is formed along the line, which violates the upper protective and decorative layer of the tile, and along the line. The zone of increased internal voltage of the material is formed. And now, if it makes a broken force in the two fragments of the tiles divided by this line, then it should break off exactly as it was planned.
Illustration from the labor textbook, well demonstrating the principle of cutting tiles.
By the way, yes, the tiles can be cut even with the help of ordinary glass cutter, but the productivity, accuracy and safety of such an approach is under a very big question.
Slightly increasing quality and convenience. The so.Called tiles cutting ticks. They, as a rule, have not a baptism, but a carbide roller (pos. 1), with the help of which a scratch is applied along the line on the front of the tiles
After applying, the risks of the ticks are divorced, and the tile is inserted between their lower part, which is a straight metal emphasized emphasis, and the upper one, on which a rocker with a broken heel is articulated (pos. 2). The emphasis should stand from below tiles strictly along the applied line, and then the ticks smoothly, but with effort are reduced. The heel has two support sides located at such an angle that the vectors of the force working on the break along the cutting line are created. As a result, this should happen. The tile is split along the line.
It seems to be simple. But in practice it turns out quite a lot of marriage, the hand is unreasonably quickly getting tired, and even before the injury is very close. In addition, to create simply by pressure of the hand, without any mechanical strengthening, a high-quality “hazard” on large tiles for the floor (not to mention porcelain tile) is not obtained, and the device becomes powerless.
Therefore, a specialized tile cutter, the approximate device of which is well shown in the illustration, is still the best manual tool.
Approximate device of the simplest desktop manual tile cutter
The entire device is assembled on the bed (pos.One). Its upper plane, which is essentially a desktop, has an elevation upwards along the longitudinal axis (pos. 2). This is just a fishing line for a trimmer to cut tiles. The rest of the plane is most often covered with such an elastic material (pos. 3) which reduces the likelihood of sliding processed blanks.
On a certain elevation above the bed is the guide (one or more) (pos. 4), along which a carriage moves along the cutting line (pos.5). A cutting video is located on it from below (pos.7), and a little from behind. A rocker with a fuckers (pos. 8). By analogy with what we have already seen on manual ticks. The force so that the carriage moves forward progressively, and at the same time with the vector down, so that the video crashes into the tile, is transmitted through the handle mounted on top of the carriage (lever).
For proper exposure of tiles on many models, stationary and mobile rulers and squares are provided that greatly simplify this procedure.
The principle of operation is simple. The tile along the planned cut line is set exactly above the ledge of the desktop (visually or on the available measuring devices). The carriage is in the rear position. Then, with the transfer of the desired effort through the red handle, the carriage begins to move forward. The video starts to “grate” the furrow in the front coating of the tiles in the right side of the lower ledge. The hinged suspended rocker when moving the carriage forward simply rises by itself and does not interfere with the movement.
After the risk is applied along the entire length of the cut, the carriage rises, the rocker under its severity translates into a “combat position”, breaking the heel down. Now it is enough to lower the lever with a small effort so that the tile split exactly along a given line.
Need to Get Shine Floor Tiles? Here is How to Get Dull Floor Tiles Shine
The moment of fault of tiles at the risk just inflicted by the cutting video.
A great many models of manual tile cutters are presented on sale, and we must correctly understand what requirements should be presented to them when choosing.
Criteria for evaluating the chosen manual tile cutter
So, it was decided to buy manual tile cutter, as it attracted its main advantages:
- Simple but very effective device device.
- Tile cutter does not require complicated care.
- High level of security in work.
- Learning to handle it is easy, usually the majority soon begins to work out everything.
- Excellent cut accuracy. With a quality tool and certain skills.
- The tool is sufficiently light and compact.
But at the same time we must not forget about some negative points:
- The capabilities of the tile cutter are limited by its size. That is, if it is small for some type of tile, nothing can be done about it.
- The possibility of cutting only from edge to edge in a straight line.
- In the building materials market, there are a huge number of tile models from unknown manufacturers made “on the knee”, with absolutely low.Quality assembly, poor fitting parts, low.Grade cutting rollers, crooked rulers, flimsy beds, guiding guides, etc.P. That is, when choosing always. “Eye and Eye”!
Types of tile cutter
Equipment is divided into three large categories:
Consider the pros and cons of each of the categories.
Advantages and disadvantages of manual tiles
Manual tile cutter. One of the types of tile cutting tools. In form, it resembles pliers. Tips are made of two materials. Solid metal and artificial diamond.
The principle of operation is quite simple. In some ways, it even resembles the work of glass cutter.
- Make a cutting line of cutting with a ruler or square.
- Cut the tiles. You need to do this on the front side.
- Put on the edges and break the cut tiles.
- The edges of the tiles are adjusted. Narrow strips are cut off with sponges resembling outwardly pliers.
Important! The tool came out at a price inexpensive, but at the same time requires skills to work.
It is better to use the manual version of the tool when working with thin wall tiles. You can’t cut a porcelain tile with such an instrument. The thickness of this material is too large.
Important! Maximum cut thickness. 8 mm.
Consider the pros and cons of the equipment.
- Acceptable cost;
- You can round the cut;
- Does not make noise during work;
- Does not form dust;
- You can work with any material in size.
- You need to have the skills of handling such a tool;
- The chance to get a marriage is quite high;
- When creating a rounded cut, an uneven edge may turn out;
- It takes a lot of time to work with such a tool;
- Significant restrictions in the issue of the thickness of the processed material.
Manual tiles are the most budget options for most buyers
Advantages and disadvantages of mechanical tiles
Mechanical tile cutter in comparison with manual is considered a more advanced option. It consists of a platform, and it is from a lever and a carriage.
Working with a mechanical tile cutter is quite simple. First you need to tightly press the tile to the base of the device. Then the video begins to move along its surface, forming a deep furrow. After drawing the cut line, the tiles can be broken by two, pressing on the edges.
It is interesting that these videos need to be changed from time to time, but there are no difficulties with this.
Important! If the tile is very large, it is advisable to buy a large heavy tool: it simply does not fit in the compact device.
Consider the advantages and disadvantages of the mechanical version:
- It works almost silently;
- It cuts the material very well;
- The chance to get to marriage is very low;
- High.Level performance (if compared with manual devices);
- Can process thin and slightly thicker materials;
- No need to place a fishing line for a cutting trimmer.
- Nevertheless, there are restrictions on tile dimensions;
- It is impossible to make a rounded cut. The tool can only cut in a straight line;
- After a while, the instrument appears backlash;
- The tool needs to carefully care.
Mechanical tiles attract many
Advantages and disadvantages of electrical tiles
The electric version of the tile cutter is the most convenient compared to mechanical and manual in work. Stands out not only of an interesting appearance, but also a high level of performance. The latter is explained by a powerful electric motor.
In addition to it, the tile cutter has a disc.Shaped cutting tool. Unlike mechanical and manual, the electric version does not make a furrow on the tile, to then manually separate the workpiece. Instead, the disk cuts through the material through. If so, then the need for a broken is excluded, and this leads to greater quality tiles.
Important! If the tile is high.Quality and has no cracks, then marriage is impossible in principle.
To reduce dusting during operation, you need to connect the vacuum cleaner to the device. A water bath can act as an alternative to the vacuum cleaner, which will supply water to the disk. But both options help to keep everything cleanly well.
If you use high.Quality discs, then any, even the most budget tool will work very well. If you take a disk of poor quality, then even an expensive machine is not able to help.
- Good performance indicators;
- The minimum chance of marriage;
- You can create not only a straight line, but a M-shaped cut;
- There is no need for special experience. It is quite easy to use the tool;
- Cuts blanks at a straight or sharp angle.
- It is quite noisy when working;
- Large weight;
- High cost of the device;
- We need a power source for the operation of the tool;
- There is no way to make a curly cut;
- Cheap discs on such a tile cutting make edges chopped.
Electric tiles have their pros and cons of
Kolner KTC 400
The rating of hand.Made inexpensive tile cutters for repairing the house rightfully includes this model from the Kolner brand.
- Weight 1.3 kg and small dimensions allows you to transfer the device in the hands, bag and store in a spacious box for tools;
- Two parallel guides provide reliable emphasis of the carriage and contribute to its smooth gluing;
- Investigation paws are fixed with bolts, which creates a tight uniform contact with tiles;
- Rubbed overlays on the basis will not let the tile slip from the table during installation and operation;
- Optimal for working with tiles and ceramics.
Convenient small electric tile for a 500 watts tile.
- A two.Meter cable allows you to work with the tool away from the outlet;
- 500 W power is optimal for cutting and wall tiles;
- A disc with a diameter of 110 mm can develop speed up to 5400 rpm, which allows you to quickly make a cut of dense material;
- Small weight of 4 kg allows you to transfer the device in your hands if necessary;
Vorther 400 mm 12 mm
Easy and easy to work unit, optimally suitable for use in the bathroom and in the kitchen.
- Smooth guides contribute to the easy and smooth movement of the carriage;
- On the handle there is a plastic tip for a comfortable grip;
- Light weight of 1.7 kg will not complicate the lifting and carrying of the tool;
- Even cut is carried out due to the reliable fastening of the roller;
- Thanks to the manual drive, it does not depend on power sources.
Tile operating tool with a cut length of 50 cm and a reliable cutting mechanism.
- The ergonomic handle provides a reliable and comfortable grip;
- Capable of cutting ceramic tiles up to 500 mm long;
- In the upper part of the stop there is a measured scale for aligning the tiles and accurate cut;
- To fix the workpiece on the table, a rubberized pad is provided;
- Light weight. 3.5 kg;
- Suitable for use in wet rooms.
Budget tiles for small finishing work and domestic use.