What to do if you don’t have a small screwdriver

What can be used instead of a very small screwdriver?

Another option is to use a toothbrush. One end of it melt with a lighter, and then immediately insert it into the recess on the head of the screw. After waiting a little for the melted plastic to solidify, turn the brush counterclockwise. Of course it won’t help if the screw is too tight.

If you do not have a flathead screwdriver, you can use any flat object to unscrew such a screw. Use a plastic card such as a bank card. Insert the card into the recess and turn it counterclockwise.

small, screwdriver

What can replace a Phillips screwdriver

The first thing to do is to take a good look at the screw. If one is longer than the other, you can screw it out more easily.

Otherwise, there is a high probability of grinding grooves because of which, you can damage the entire product. You can replace a Phillips head screwdriver in the following ways.

  • A coin of any denomination. The main thing is that its edge fits into the recess of the screw. The coin simply needs to be inserted into the screw and rotated counterclockwise.
  • If the screw is screwed in weakly, insert a fingernail into its slot and twist it the same way you would twist a screwdriver.
  • Insert the flat tip of the knife into the slot and unscrew the screw. Here you need to be careful, because a low-quality knife can bend, break, and the screw will remain in place.
  • A compact disk is a great way to replace a screwdriver. However, this analogue is only suitable for screws that are loosely driven. Otherwise the disk will break.
  • If the slots are too narrow, you can widen them with a metal hacksaw and then use any method you feel comfortable unscrewing.
  • If you have a flathead screwdriver of the appropriate size, use it.
  • Melt the handle of a toothbrush and then insert it into the slot of the screw. When the plastic has hardened, you can proceed with the unscrewing. But this method will not be effective if the screw is screwed too tight.
See also  Tool for cleaning joints between tiles

What can replace a Phillips screwdriver

First, you need to take a good look at the screw. If one socket is longer than the other, it makes it a lot easier to unscrew.

Otherwise, there is a high probability of grinding grooves because of which, you can damage the entire product. You can replace the Phillips screwdriver in the following ways.

  • Coin of any denomination. The main thing is that its edge fits into the groove of the screw. Simply insert a coin into the screw and twist counterclockwise.
  • If the screw is loose, insert your fingernail into the disk slot and twist it in the same way you would twist a screwdriver.
  • Insert the flat tip of the knife into the slot and unscrew the screw. Be careful here because a low-quality knife can bend or break while the screw remains in place.
  • A compact disc is a great way to replace a screwdriver. But this is only good for screws that are loose. Otherwise, the disk will break.
  • If the slots are too narrow, they can be enlarged with a metal hacksaw and then any method of removal can be used.
  • If an adequately sized flathead screwdriver is available, use it.
  • Melt the handle of a toothbrush, and then insert it into the slot of the screw. When the plastic hardens, you can proceed with unscrewing. But this method will not be effective if the screw is screwed too tight.

How to unscrew the screw in the phone?

Drip glue into the torn hole in the head and insert the screwdriver into it. Press down on the screwdriver for a better connection between the screw and the screwdriver. Do not wiggle the screwdriver while the glue is drying!.Varieties of screws

See also  Which electric screwdriver is better Bosch or Makita

Use a metal saw or an angle grinder to make a precise and accurate vertical cut across the top of the screw. After these steps, it can be unscrewed with a regular flat-blade screwdriver. Use a torx head: Insert the torx head into the cavity of the hexagon socket in the cap of the metal part.

How to unscrew a torx bolt?

On a small-sized hexagon, hit with a hammer or chisel in the direction of the upcoming unscrewing. If the diameter of the screw to be worked is small, make a groove on its head with an angle grinder, which can be used to try to unscrew it with a screwdriver.

Use a metal saw or an angle grinder to make a clean, clean vertical cut across the top of the screw. After these steps it can be unscrewed with a normal flat-blade screwdriver. Using a torx star: you need to hammer it into the recess for the hexagon wrench in the head of the hardware.

How to unscrew the screws on your phone?

Another option is to use a toothbrush. Melt one end of it with a lighter, and then immediately insert it into the recess on the head of the screw. After waiting a little while for the melted plastic to solidify, twist the brush counterclockwise.

Tape it up, then find small screwdrivers and screw it in. A box cutter is perfect for this. Get a screwdriver for eyeglasses. at the optician.

small, screwdriver

How do you unscrew small screws??

Tape it up, then find a small screwdriver and tighten it down. A box cutter is perfect for this. Get a screwdriver for your glasses. at the optician.

Push down on the screwdriver for a better connection between the screw and the screwdriver. Do not wiggle the screwdriver while the glue is drying! After waiting a while (depending on how quickly the glue dries), gently, without sudden movements, begin to unscrew the screw, gently increasing the force.

See also  You can charge the battery of an electric electric screwdriver with a car charger

How you can replace the Phillips screwdriver?

How to unscrew a screw in your notebook computer that won’t unscrew

You can drill out a screw with a drill or electric screwdriver. I have an electric screwdriver, but I decided to try a third option. The third option is to make a notch along the head of the screw and unscrew the screw with a flathead screwdriver. That’s what I did.

| Denial of responsibility | Contacts |RSS