What tools are needed for puttying walls

Tools for wall putty

Virtually no repairs today can do without putty on walls and ceilings. After all, putty. is the basis for virtually all finishing work. The surface is putty under wallpaper, under painting, under decorative plaster, etc.д. Let’s look at what is the minimum set of tools should be a person who intends to putty his own walls.

A mixer. that is, a drill with a special nozzle. Obligatory in the case when you buy putty in the form of a dry mixture (and so it usually is), and not a ready-made mass. With a mixer putty can be stirred very quickly and without lumps. If you try to mix it by hand with some kind of spatula, then nothing good will come out of it, you will have to stir for a long time, in small portions, and then you will start to get unmixed lumps.

Such nozzle on the drill is inexpensive, but the drill should be in the house of every self-respecting owner.

trowel set. Here can be useful spatulas of any size, depending on the walls. Both the smallest and the largest 40-50 cm will do. If you have only one wide trowel of some kind, you just can’t putty the wall in the problem areas (I mean behind the pipes, behind the radiators, in some niches, etc.).д.)

Brushes and rollers for primer. Since puttying the surface is unlikely to do without primer (to improve adhesion), so take care of what was primed. It’s faster to do it with a roller, but the spray can fly quite far, so if you want to do everything neatly, carefully and meticulously, you can take a wide brush and some smaller to reach the corners and problem areas.

See also  Hand-held electrical tools and equipment

Trimmer. If you are going to putty a thick layer to level the walls, then you need a long metal rule. It makes it easy to level a putty layer and the wall is level. Only putty in a thick layer can be applied as a starter putty.

Alcohol level or plumb line to set the beams for the starter putty. Only useful if you need to level the wall with the starter putty.

Sanders. to grind down the putty after it dries. The finer the sandpaper, the more beautiful the surface will be after troweling. If you wipe the surface with a small 240-grit emery cloth, it will be ideal. Only use a fine emery cloth to grind away the finish putty. If the putty is starter, it will be faster and more correct to wipe it with a coarse sandpaper. It will be much faster.

Hand sanding machine. Plane with a handle and clamps to which the router is mounted. It is better to trowel putty manually, because there are also electric tools for such purposes, but manually it turns out better quality.

A container to stir the putty in. You can buy a special one in a construction store, or you can pick up some old bucket and no longer bother with this issue.

So, puttying the walls is needed, first of all, to make the walls smooth. Since putty is often confused with leveling, let me explain. putty just makes the walls smooth, it does not make them flat, it is not designed for this, and to make the walls were smooth. they must be leveled with plaster before putty.

See also  Tools to work with mastic on your own hands

What tools are needed for puttying

  • Drill, equipped with a special mixer attachment.
  • Trowel set.
  • Rollers and brushes for priming walls.
  • Rule.
  • Alcohol level or laser level.
  • Sandpaper.
  • A manual scraper.
  • And, of course, you can’t do without a container in which to stir the plaster.

How to putty walls yourself

Even and smooth walls. an integral part of the interior of any apartment, regardless of what they are covered: wallpaper or paint. Smoothness and evenness of the walls is achieved with the help of puttying technology. Puttying walls is quite simple and easy, even for a non-professional. All it takes is to understand a few common points.

Little information. From time to time the wall filler is also called basecoat. It is unclear who and when introduced the term, because directly to the finish of the walls it has nothing to do.

In general, levkas is iconic ground made from fish glue and linseed oil. Purpose: wood primer. Bogomazy covered the base of the icon with such a composition, and then wrote on it.

How to putty walls with finishing putty

The purpose of the final putty is to make the surface perfectly smooth and beautiful. The development of puttying is not different from starting puttying. To achieve perfect smoothness, puttying is created with an extra light. This is usually a portable lamp. It is applied in a very narrow layer. up to 2 mm wide and is designed to remove small cracks and pores.

Size of tools for puttying

To process the walls it is rational to choose the necessary size tools.

Wide for leveling

To level out uneven bases and make it easy to putty walls use:

Thanks to this it is possible to eliminate the most coarse and massive defects. They are used for applying the initial filling compound, so called, and the material is applied as thick as possible.

See also  Tools for carving wood with their own hands

Is it convenient to putty in the middle

Medium tools for puttying (with a width of 150 to 250 mm) are used to treat large irregularities and dents, which remained after the initial processing.

How to apply wallputty.-1st coat in fresh wall

This trowel allows you to create the smoothest putty layer possible. The main task of such a trowel is to patch potholes and eliminate visible defects.

tools, needed, puttying, walls

After treatment the trowel may leave small protrusions, which are removed after complete drying with a special ribbed paper.

Narrow for puttying

The narrow (50-100 mm) layer is suitable for small hollows left over from the previous mixture. After using it, there are almost no imperfections on the surface.

This tool is irrational to use to make the surface as even as possible, because it fully repeats all the chaotic irregularities on the wall. It is often used for hard-to-reach areas. This material can be used to collect a mixture from a container and apply it to the work surface.

How to hold the trowel

Putty layer of optimum thickness is obtained by holding the trowel at an angle of 60 °, followed by a decrease in the angle with the flow of the mixture. To observe such an inclination, the trowel must be held by the handle with a working hand, and the fingers of the second hand hold the corners of the plate.

| Denial of responsibility | Contacts |RSS