What tools do you need to assemble furniture?

Tools for furniture making

In fact, there is no need for serious investment in tools for the assembly of cabinet furniture, although this does not apply in case you plan to open a serious furniture production.

For assembling, for example, a closet. kitchen wall or a computer table is quite possible to get by with a limited set of the most necessary tools for the manufacture of modular (cabinet) furniture. So what should be this minimum set of tools for furniture making?? On this and not only talk below.

Tools for making furniture with their own hands:

  • Electric electric electric screwdriver. you will need it for screwing screws, fixtures and, of course, for fixing furniture fittings. Many might argue about the need for an electric electric screwdriver when there are modern electric drills with adjustable power and speed. But you still have to keep an eye on the power cord, often change the different screw heads, minifixes or screwdrivers, and drill bits. It doesn’t take a lot of time individually, but overall it all looks pretty time-consuming. Yes, and in general, an electric electric screwdriver when assembling and making furniture is the main tool, thanks to it you can significantly save your time on assembly.

If you have not yet in the household of an electric electric screwdriver, it is time to buy it. It does not matter whether you collect a table or a kitchen wall is not worth saving on buying an electric electric screwdriver, as you know the miser pays twice, and so it is here. For example, a tool made by a well-known Makita brand will serve you 5 or even ten times longer than the cheaper one.

But this does not mean that if you buy a more expensive and “smart” electric screwdriver of a famous brand, it will be easier and simpler to assemble or make case furniture. Here are the main indicators that you need to pay attention to when buying an electric electric screwdriver:

  • The quality of the charger. do not fall for the stories of salespeople about the charging speed, the so-called hourly charge. will kill your tool in just a few months. The optimum time it should recharge is about six hours;
  • The tool should have at least eight power modes and a separate mode for drilling;
  • You should feel your tool in your hand so to speak hard but comfortable to use;
  • Chuck speed and smooth operation.
  • A set of screwdrivers may be needed in hard-to-reach places that you can’t reach with an electric screwdriver.
  • Screwdriver. if you already buy it, it is best to immediately take a reversible (the ability to turn in both directions) screwdriver with interchangeable tips, it is a tool that comes in handy not only when assembling furniture, but also for the household too. Do not skimp here as well, take a quality screwdriver. the most important thing in it is the quality of the bits, they will last more than a year.
  • Drills. the most common drills with a diameter of: 4.5 mm; 7.5 mm; 10 mm
  • Confirmation drill bit. from the name it is clear that it is designed for drilling holes for mortars. The first 5 millimeter-diameter drill bit drills a hole for the body of the faceplate, and then, thanks to special additional notches, a 7 millimeter-diameter hole is drilled for the neck of the faceplate. It is necessary in order not to break the element with the chipboard board. And on the final stage of drilling, countersinking under the collar of the armature nut takes place, so that it is completely sunk into the material.
  • Forstner drill bit 15 millimeters in diameter. will be needed to drill holes for installing minifixes or rasteks.
  • Drill bit for drilling holes for furniture hinges with a diameter of 26 millimeters.
  • Hexagonal bit for an electric electric screwdriver. needed for screwing in screws.
  • An awl. an awl is needed for marking exact spot for drilling so the drill will not slip so the hole will be precisely and evenly made.
  • A simple pencil. Needed for marking, it is best to use a simple pencil marked HB, which means that the medium-hard pencil is easier to draw with and better visible.
  • Measuring tape. if you already buy one, take a tape measure with a not very wide bar, and a length of up to 3 meters is enough.
  • Construction angle. you need it for marking the fiberboard and particle board, and also for holding the angle of 90 degrees for fixing perpendicular elements.
  • Sandpaper. preferably fine-grained. It will be needed for sanding sharp edges on the ends of parts with particleboard or for removing sharp corners in facades with fiberboard.
  • Household iron. will serve as a construction hair dryer, though a little slower, also needed for gluing furniture paper or plastic edges, but not thicker than one millimeter.

An additional tool that you will need when making furniture at home:

  • An electric drill. its presence is essential when drilling holes in Woodchipboard elements or a wall. It is best to take a drill with reverse and a power of about 500 watts, it will be quite enough.
  • Electric jigsaw. if you just assemble modular furniture or a sliding door closet, you may need it only at the final stage when you need to cut a hole in the countertop under the sink or built-in hob undercut skirting or cut a hole in the cabinet under the hood hood and so on.д. Really indispensable thing in the household recommend.
  • The construction dryer. its main purpose in the manufacture of modular furniture is gluing of furniture PVC edgebanding on the ends of particleboard details. But you can do without it, if you are just assembling prefabricated furniture.
  • A box cutter. you will need it for cutting furniture edges and other details, it is a sharp knife and it is not necessary to sharpen it, and if wear out simply change the blade.
  • A jamb knife. you’ll need it to cut the PVC furniture edge after gluing.
  • Rubber mallet. will be very handy for installing doors in a closet.
  • Electric screwdriver
  • Allen key for rebate screws
  • Screwdriver
  • Drills
  • Diamond drill bit
  • Forstner bit
  • Drill bit for furniture hinges
  • Screwdriver bit
See also  Tile and porcelain tile cutting tools

In that case the MINIMUM assembly kit will suffice

A tape measure (at least to measure the diagonal of the cabinet); A Phillips screwdriver (or better a set of screwdrivers); A construction knife (at least to open packages); A hammer (at least to nail the back wall of the cabinet);

What tools are needed for furniture assembly

As a matter of principle! If you only occasionally face joinery work, the small cheap model is absolutely sufficient for you. If you want to make furniture items your business, it is better to buy an expensive model with good functionality.

  • Hexagonal wrenches for screwing in screws with a screwdriver. for attentive screwing in.
  • Screwdriver. According to professionals, the reversible model with interchangeable tips is a balanced option. High-quality screwdriver with a good bit is needed for you not only for the manufacture of furniture, but also for repair work.
  • Drills 4.5, 7.5 and 10 mm across.
  • Screwdriver. It is used for preparatory drilling of holes for screws. Hole diameter of 5 mm across is the usual version. Additional notches make it possible to drill extended holes up to 7 mm.

Principle! The drill is also used to countersink the holes for the heads of the confiermat for full sinking into the chipboard. This is an essential tool for assembling particleboard furniture.

Essential Tools & Tips For Assembling Furniture (from a Tasker) NEW Tool Update

  • Fortner 15 mm drill bit. This tool is needed when making furniture with your own hands to make holes for installing minifixes and rasteks.
  • Drill bits for hinges and furniture with a cross section of 26 mm.
  • Concrete bit.
  • Splint. for making punctures before drilling work. This prevents the drill from slipping.
  • Medium-hardness (HB) pencils for markings.
  • A tape measure. completely sufficient three-meter.
  • Angle. Used to check the perpendicularity of mounts, also for marking when working with chipboard and particle board.
  • Fine sandpaper. Grinding sharp edges on chipboard ends or removing sharp corners on facades made of chipboard is a great sanding solution.
  • Iron (it is sometimes replaced by a hair dryer). used for gluing cardboard or narrow plastic edges.

Natural wood hangers

The theater begins with a coat rack, everyone knows that. And so the hanger should be not only convenient, but also beautiful.

For your information! The simplest hangers can be made in a smaller version and used as a key rack.

Option one. A simple hanger for home or office

A simple coat rack for the home or office Rectangular coat rack. For the manufacture will need a board or a small furniture board, the size can be chosen at your discretion. You also need to buy some self-tapping screws, hooks, hinges, on which the hanger will hang, as well as 2 dowel nails.

Of the tools you will need an electric electric screwdriver or screwdriver, as well as a saw if the dimensions of the workpiece are larger than required. If the surface is not smooth enough, it is worth preparing sandpaper.

Tools for work

To decorate the hanger, prepare a stain, 3 shades of enamel or acrylic paint and masking tape, a brush of medium thickness, transparent varnish or wax compound.

We measure the right length of the board or furniture board, and mark it with a pencil. Sawing off unnecessary material. Finish the edges and surface of the workpiece with sandpaper.

Sawing the board

Sand the surface

We paint the wood with a stain in 1-2 layers. Wait until the workpiece dries well.

Stain application

tools, need, assemble, furniture

For your notes! In this example we use rosewood stain.

Wood stain: a varietyTurn the board over and put masking tape around the perimeter. The coat rack will not be decorated on the underside.

Putting a scotch tape on the back side

On the front side, we outline a beautiful geometric pattern by randomly gluing strips of masking tape.

Shaping the pattern

Dye the front surface of the coat hanger in three shades. In our case it is white, beige and blue. But even if you take only one shade, the finished product will look stylish.

Tinting

Remove the tape

Coat the coat rack with wax to protect the surface.

Wax it with a sponge

On the underside, we screw in the fasteners, leaving 3 centimeters off the ends to hang the finished product on the wall.

See also  The tool for laying aerated concrete with their own hands

Fixing the hangers

Drill 2 holes in the wall for dowel nails. The distance between the holes equals the distance between the fasteners on the hanger. In the holes hammer dowels and screw in screws, but not all the way, the heads should protrude a little.

Screw on the hooks. Use short self-tapping screws.

Fixing the hooks with self-tapping screws

Now you can hang it on the wall and use it for its intended purpose.

Stylish coat rack

Vintage coat rack for home and country

Stylized as a rustic fence hanger will decorate the hallway in rustic, eco, chalet, rustic.

Hanger for home and cottage

To make the coat rack we need a saw, a screwdriver or an electric screwdriver, hooks, a grinder or a sanding stone with various grit size paper, transparent varnish, acrylic paint and tints (blue and brown), a brush and a wax or paraffin candle (without dye).

You can make a coat rack both from new boards and from an old wooden pallet. The main thing is that the wood should not be rotten or heavily stained, especially with greasy substances like machine oil.

Cut the tray into individual boards. In our case the hanger consists of four segments, but you can increase their number if necessary. The segments are held on two horizontal bars.

We mark the boards and then saw out the pieces with a mitre saw or a jigsaw.

Pieces made of old boards

Painting the workpieces with white acrylic paint in one coat. The wood grain is accentuated, but not hidden by the paint.

White acrylic paint is applied and the pile is sanded

If the lint on the boards rises during the paint application, then after the workpieces have dried, they should be sanded with a fine sandpaper. At the same time the first scuff marks will appear on the boards.

Rub the workpieces with a candle in the places where the paint will be removed the most. That way we will obtain the effect of an aged surface.

Use a candle to rub the workpieces unevenly

Paint the boards with blue acrylic paint in one thin coat. Wait for the paint to dry. This usually takes 1 to 4 hours.

Boards are painted with blue paint

We take a sanding stone and start peeling off the blue paint. First use an emery machine with a grain of 80, then finer up to 240.

Now, to make the surface more “natural”, add some “dirty spots”. Mix the white acrylic paint with brown tint. Let’s apply a little paint on the surface of workpieces with a brush and immediately wipe it with a wet rag. There should be some brown stains.

Workpieces in the process of dyeing

Finish with a transparent varnish. We apply it in one or two layers and leave the workpieces to dry.

Turn the boards face down. Place on top of the crossbar. Fasten everything with self-tapping screws.

Fasten the hangers and hooks with self-tapping screws. The hanger is ready!

Vintage coat rack

A furniture template is a device that speeds up and facilitates the process of making wooden structures.

  • greatly simplifies the process;
  • The result is more accurate;
  • It is easier to make accurate measurements and follow them when drilling;
  • less time is spent on work.

A separate feature of such a device. the scope of its application is not limited to furniture assembly.

You can buy a factory-made device or make it yourself.

After you finish the interior, you can use such a template in construction and even mechanical engineering. Conductor can be used for drilling not only on plywood and wood, but also cylindrical parts.

If you plan to start assembling furniture with your own hands, then you will have to prepare the furniture assembly tool in advance.

Most likely you will need a screwdriver, it can be used for screwing fixtures and screws. In addition, you will need it in order to fix the furniture fittings. In its absence, you can use an ordinary power drill, but then you will need to constantly monitor the length of its wire. Screw bits and coffer bits will also need to be replaced regularly.

At home you can do with a standard set of devices, most of which can be found at each master.

  • A drafting square is a kind of ruler, a device needed to draw perpendicular lines of marking.
  • Hard-soft simple pencil, ruler, eraser will allow you to make a correct marking.
  • A five-meter tape measure with a permanent stop button.
  • Construction levels will help to determine the height of the furniture, to make it flat.
  • A thick awl with a rubber grip is needed for marking out furniture fixtures.

The electric tool is needed for more demanding jobs related to sawing and processing furniture pieces.

An electric drill allows you to do most of the furniture-making work. Specialists advise using a device with a power of 500 to 750 watts, with reverse and speed regulator. The tool must be light, not heavy in the hand. The tool can be equipped with a metal or plastic chuck.

Many craftsmen prefer an impact electric drill in case the furniture has to be hung on the wall. An alternative to the drill can be a cordless electric electric screwdriver with reverse and speed regulator. It is convenient to work with a light tool, committing 400-500 revolutions per minute.

Electric jigsaw

The device saws boards, makes shaped notches, prepares holes. With its help, you can improve the design of furniture, supplementing it with shaped or radiused elements. When selecting a tool, you must consider its power. Optimal parameters. 450-750 W. A powerful electric jigsaw makes several thousand vibrations per minute. It will greatly facilitate the work of the master, will serve him for a long time, effectively. It is desirable that the saw has a pendulum stroke, speed regulator. There are jigsaw models with a removable cutting blade.

See also  How to attach the snow ploughs to a single-axle tractor correctly

Grinding machine

This tool complements the jigsaw. It gives the parts a smooth even surface. At home, it is better to use a belt version, 650 W, with metal roller guides. The additional functions of the attachment do not interfere:

Special bands are purchased for the sander. They come in two kinds. for rough and finish processing the material up to finishing. It is practical to buy oblique glued segments, as they are reliable. Tape sizes depend on the sander.

Electric iron

On a metal soleplate, 1600-1800 W industrial hair dryer. indispensable items for furniture making. They allow you to glue the melamine edge on the end part of the elements Laminated chipboard. It is good, if the hair dryer will be equipped with a heating regulator, without a fragile ceramic insert.

Additional tools will still be needed to make furniture.

A flexible metal ruler up to 1000 mm long is useful for uneven parts marking.

The hammer is a joinery tool that nails the fasteners on furniture.

Stapler is indispensable in furniture production. This is a versatile tool that can perform many operations. Among them. upholstery fabric, assembling cabinets, re-stitching material. Nails, screws, and staples are used for fasteners.

A hex wrench will be needed to tighten or unscrew screw fasteners when it cannot be done with a screwdriver, drill, electric electric screwdriver.

Drills of different kinds: wood, metal, pobedite, Forstner.

Clamps fix parts at a certain angle.

Pliers take the fasteners out of Particleboard.

Many furniture makers use a cudgel to hammer out sheets of Laminated particle board.

Choosing edging and furniture fronts

These elements perform an aesthetic function, so you need to choose them wisely. Making beautiful cabinet furniture that will look expensive is not difficult if you carefully select the decorative parts.

Edging

On the right choice of this detail depends on the protection of the saws of the body boards, and, consequently, the strength of the furniture. If you do not take care of quality insulation, moisture can easily penetrate into the structure of the furniture and destroy them from the inside.

There are several options, one of the best for making furniture with your own hands. PVC edging. This finish does not require special skills or professional equipment. Standard sizes: 0,4 and 2 mm. In order to save money, a thin edgeband is glued to the inaccessible ends, and 2 mm. to the outer ones, which will be exposed to high loads and friction.

Other advantages of this type of furniture finish:

  • Melamine edging: cheap, but impractical option. Glued with a common iron.
  • ABS. similar to PVC, but made of environmentally friendly material.
  • Overlay P-profile is glued on the liquid nails. Impractical because of the accumulation of dirt at the joint, but it helps to hide the defects of a poor cut.
  • Insertion T-profile. seldom used, it is inserted into the groove made by a mill.

The front part of the furniture

Kitchen fronts and drawer doors are the “face” of furniture, so they should look much more presentable than other parts, which are not so conspicuous. To make this element with your own hands means to save time, because usually such things are made to order, and the wait can take several months.

As for technical subtleties, the front part is standardly made 2 mm smaller on each side of the main body. For example, for 600 mm wide furniture, a frontage with a width of 596 mm will do. The raw material of the decorative part is different from that of the main body.

Among the cheapest fronts are laminated Fiberboard panels with a short lifespan. Mostly found in “woodgrain” finishes. Increasingly popular softforming is similar to Fibreboard, but differs in the two-color layout and relief on both sides of the panel. Such furniture is only suitable for dry rooms (bedroom, living room). Often one can see non-standard fronts with figured stained glass cutouts. Glass is usually attached to the overlay on the inside of the door.

Postforming

It is the execution of high-quality, durable decor. Characterized by the severity of forms, executed without aesthetic excesses. It is based on chipboard or particle board panels, which are coated with a thin layer of seamless plastic. Plastic facade. another expensive, but extremely practical option.

At the peak of popularity now are super glossy acrylic panels for making furniture with their own hands.

tools, need, assemble, furniture

Wood and veneer

Expensive, but natural materials. There is an opinion, that from the point of view of ecology this variant loses, because it contains a lot of varnish and impregnation. Painted and enameled fronts are becoming rarer. The rich color that was so valued before has also appeared in competitors, such as acrylic. The significant disadvantage of such furniture is that it is not resistant to deformation and scratches.

Aluminum-glass fronts

The optimal method for making furniture with their own hands in the style of high-tech.

| Denial of responsibility | Contacts |RSS