Why is the gas mower gas at idle. lawn mower or trimmer for grass

The lawn mower stalls

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when lawn mower stalls at high speeds. There are quite a lot of these circumstances.

Why Chinese lawn mower does not develop speed?

Trimmer for grass does not gain momentum. very frequent inconsistency and of course does not always have a common solution.In this…

Trimmer for grass does not gain momentum. what to do?

1st launch of the latest lawn mower.Removed the grid from the silencer, began to work.

Another, this is the presence of malfunctions in the power system.

In this case, the lawn mower will stall at idle. The problems with the power system may lead to a drainage or incorrect carburetor adjustment.

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The problem may be that it is weak or cracked at all.

These are the main reasons why the gas mowl can stall.

In recent years, a gasoline trimmer for the grass has made the status of one book from the main tools in the arsenal of summer residents. And such an environment is logical, because a motorized braid for grass allows you to quickly put a personal plot in order. But at the form.

Lawn mowed (trimmer for grass) Kuban BK-4500! Brief review, launch, work.Trimmer for grass, electric cos and lawn mower (lawn mower). varieties of a lawn mower, agricultural manual. Lawn mowed (trimmer for grass) Kuban BK-4500!Launch of Blacksokos (trimmer for grass) Kuban b.

When caring for a personal plot, summer residents periodically face the fact that the lawn mower is not started. There are many reasons for the refusal of the tool. For the correct diagnosis of the problem, the owner of the useful in the country’s dive must know the device and the principle of operation of its individual parts.

Since the gasoline trimmer for grass refers to complex devices, before starting work, it is necessary to carefully study the operating instructions. Very often it is simply ignored, or they get acquainted with it superficially. As a result, when the tool stalls or refuses to start, the question arises. “why the lawn mower is not started?»A long seasonal break in work, improper storage and untimely maintenance of a trimmer for grass, will deliver a lot of trouble to the summer resident, to eliminate the reasons.

Where to start diagnostics motorcycles

If the lawn mower does not start or immediately stalls after starting, it is necessary to sequentially check all the main nodes and assemblies. The test algorithm is as follows:

  • Fuel tank (fuel quality);
  • Candle and candle channel;
  • Air filter;
  • Fuel filter;
  • Breather;
  • Graduation channel.

These nodes are most often source of basic problems, which can be eliminated after a thorough inspection.

Check the fuel mixture

Before starting the engine of a gasoline braid for grass, check the presence, and the quality of the fuel mixture. Do not save, do not greedy and “do not smarter” in this matter. Repair or replacement of the piston group will cost you too much (sometimes up to 70% of the cost of a new tool). Prepare the oil fuel mixture strictly according to the instructions. Calculate its number from real needs. Excess gasoline left after work loses its qualities over time.

We diagnose a candle and candle canal

If the quality of the fuel mixture is not in doubt, and the lawn mower stalls when starting, then a flooded candle may be the reason. Here, a regular candle key is suitable for repair (every motorist has probably has a spare candle.

mower, idle, lawn, trimmer
  • We twist the candle and wipe;
  • We thoroughly dry it (you should not bake it);
  • Excess fuel in the chamber we drain through the candle hole and dry it;
  • We clean the old candle from the carbon on a sugar or a ladies’ file;
  • We set a gap with a distance of 1 mm (you can check with any coin);
  • We return everything to place and try to start a trimmer for the grass.

Dry the channel at least 30-40 minutes. Otherwise, there is a risk of re.pour a new candle.

mower, idle, lawn, trimmer

If the working candle is working, the nest, where it is located completely dry, and the lawn mower does not want to start, lubricate the threaded connection with gasoline. It should be slightly moisturized. No matter what wonderful spark gives out a candle, there is simply nothing to light up in a dry chamber.

If the trimmer engine for grass still does not start, such a cause as the lack of spark due to weak contact between candles and a high-voltage wire should be excluded. If the connection is of high quality, and there are no sparks, most likely, you have “flew” the ignition unit. Here you can’t do without a master, t. to. The part is not repaired, but sold by a whole knot.

Diagnosis of the filters of the lawn mower

Another reason why the gasoline braid for grass stalls is an air filter. To exclude it, try to remove the filter and start a trimmer for grass without it. If it turns out, then you will have to change the air filter to a new one, or at least blow and carefully clean the old.

You can’t start a gasoline trimmer for grass due to contamination of the fuel filter. This is the next stage of our algorithm. Here we check the state of the filter element and, if necessary, change it with the new. When replacing, try not to leave a suction pipe without a filter, this is prohibited by any operating instructions. Rush can turn into the repair of the piston group of the engine.

Sapun and graduation channel

Often, “delicate” branded models of benzos are not launched and stall due. The main function of this element is to align the pressure in the gas tank. When clogging this node, a vacuum is created in the tank that prevents the supply of fuel. Eliminate the malfunction can be cleaned by cleaning the sounds. You can use a regular needle for cleaning.

Normal work of cos with internal combustion engines can be disturbed due to dirt from the exhaust channel or clogging of the muffler grid. There is such a problem on the models of the older generation. You can solve the issue with traditional cleaning and removal.

mower, idle, lawn, trimmer

How to replace the spark plug correctly?

As you can see, there is nothing superplousing in this procedure.

A new spark plug for a two.stroke internal combustion engine of a gasoline braid for grass is installed in return for the old detail that failed

The gasoline trimmer for grass stalls at idle

Often, when reducing the speed, the motor motorcycles stalls and does not support idle speed when re.starting. The main reasons for the occurrence of such a breakdown include pollution or the dumping of the carburetor, as well as clogging of the air filter.

Gasoline trimmer for grass stalls at idle

In case of violation of the optimal settings of the carburetor, it is necessary to clean it and repeated adjustment. You can cope with clogging the air filter of a trimmer for grass by placing it for several hours in a solution with a conventional domestic detergent. If independent cleaning has not helped to cope with the blockage, it is better to purchase a new filter element in accordance with the operating manual.

After the measures, the user will not encounter a situation for a long time when a trimmer for grass stalls in idle and functions only when gas supplies.

They brought a Chinese benzotrimmer for repairs (they said it turned in the back, we are undergoing to start like.

Apart from time to time, from time to time, gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick. To find out, try to use the braid by loosening the gas tank cover. If in this mode the device is working on a dull way, clean the valve.

over, the lawn mower can stall due to the disgusting receipt of fuel in the carburetor. Nevertheless, repair t.e. It works normally at low speeds. Why then the device starts up, ask you? The reason for this is that at first, the fuel gradually runs into the carburetor and is enough to work at high power. The lawn mower does not work at idle. But then it is produced and at huge turns the engine begins to stall. As for the carburetor, here the problem may also consist in the fact that its body is very pulled.

In addition to everything else, do not forget to check the fuel intake hose. The inconsistent may be that it holds weakly or in general cracked.

These are the main prerequisites why the lawn mower can stall.

Air filter

On the pages of the global network, you can find information that the chainsaw of the Stihl 180 can stall due to severe air filter pollution. I would like to refute this not absolutely true information, and say that the STIHL carburetor MS 180 is equipped with a compensator, which is designed and installed in order to make an air focus necessary for the usual operation of the Stihl 180 chainsaw, bypassing the dirty filter. Of course, the power with a clogged air filter will fall a little, but it will definitely not stall. Another capacity may fall due to the wear of the piston, here the repair of the piston chainsaw of the Stihl MS 180 will already be required.

Forbidbenzokos when clicking on gas: causes of their solution.Glumpnbenzokos (trimmer for grass):. Fighting.

  • idle sensor failure;
  • clogging of the throttle;
  • work of the sensor of the position of the trissellain;
  • Injector or carburetor pollution

The grounds for breakdown can be completely different, therefore, when eliminating them, it will be necessary to operate with all kinds of actions and techniques. If your shoulders are considerable driver’s experience, and you know the features of the car’s work as your five fingers, regardless of the model, then the elimination of this kind of malfunctions will not cause you any problems. And all because such breakdowns are not complex or serious. It follows that you can establish the operation of the car without outside help. Well, if the level of awareness or lack of free time will not give you the opportunity to eliminate all defects yourself, it is better to seek help from knowledgeable people who can save you from unpleasant moments in the shortest possible time.

The lawn mower does not drop turns

You should not buy an expensive and bulky lawn mower to mow grass on a small lawn; It can be easily replaced with a gasoline / electric trimmer. The device of these machines is quite simple, they are easy to use and unpretentious in maintenance. But sometimes problems arise. One of them. When a trimmer for grass does not produce the maximum number of revolutions. Will be discussed in this article.

The reasons

Trammers for grass are reliable and durable (of course, with proper care). Most often, malfunctions arise due to contamination of structural elements.

If the engine of your bush cutter does not start, does not gain speed, does not reach the necessary power or suddenly stops, the reason may be:

  • Low quality fuel (fuel mixture), it can be in long.term storage or not correspond to the recipe of the mixture;
  • Digestive wound on the rod of fishing line / knife head;
  • Cut air filter / muffler;
  • Dysbalance of carburetor.

Ways to eliminate problems

The first three reasons are quite easy to eliminate. If this is a mixture, you need to pour the old fuel from the tank, prepare a new emulsion of high.quality gasoline and engine oil (if your engine needs a mixture) and pour it into a fuel tank. If a trimmer for grass works on clean gas, it’s still easier.

In the second case, the details of the trimmer for the grass should be carefully released from wound grass.

The last reason why the Fergie cell does not work properly will require you a little more knowledge and skills.

Follow the procedure to correctly adjust the carburetor brush. First clean the air filter thoroughly. It is easiest to wash it (it is advisable to regularly rinse the filter with water after 9-10 hours).

Then find the adjusting screws on the diagram of your trimmer for grass, which is in the instructions for the operation of the device. Usually there are three of them: the first is responsible for the supply of fuel, the second. At idle, and the third is designed to limit the number of maximum engine speeds.

Then turn on the device and wait until the engine warms up.

Slowly tighten the first adjusting screw (fuel mixture). Catch the moment when the engine begins to stop, and turn the screw in the opposite direction by 45 degrees. If you do not have time and the engine stops, turn the screw 90 degrees. Open the throttle and see how the speed increases. Then slowly unscrew the screw (each revolution of 45 degrees), until the engine begins to develop maximum speed on full gas.

HOW-TO Fix A Lawnmower That Revs Too High!

The second screw, as mentioned above, regulates the speed of the idle speed of the engine. Weakening it, you reduce the number of revolutions, rotate. Increase. The propeller must be adjusted to ensure reliable operation of the engine at low speeds. For better starting, slightly increase the engine speed. At the same time, make sure that the engine makes several tens of revolutions before moving knives / coils with fishing line. If the engine does not start properly, slightly tighten the screw.

After you adjusted the first two screws, check the operation of the device with the maximum engine speed. If necessary, you can limit it (maximum). This will protect the engine from “boiling”. To do this, you need to hook the third screw. Loosen the locknut until the adjusting screw is quietly turned. To increase the maximum number of revolutions, the screw must be unscrewed, reduced. On the contrary, tighten. Fix the nut nut. Check the engine again.

Remember that carbohydrate adjustment is not the final procedure. During the work of the brush, you will probably have to work with it more than once, since the unbalanced carburetor means both increased fuel consumption and quick failure of the ignition, not to mention reducing the power and efficiency of the device.

Little tricks

  • If you cannot tighten / loosen the adjusting screws correctly, this may be due to the fact that the spring is too thick and hard. Then you can choose more suitable.
  • If your device needs not pure gasoline, but its mixture with engine oil, strictly observe the proportions specified in the operating instructions. There is one small thing: the recommended ratio is 1:25 (for all oils) or 1:50 (for “native” oils). Try the first ratio first of all. If, according to this recipe, oil leaks appear on the engine and strong deposits form on the spark plug, half.lubricate the oil. This usually helps to remove traces and reduce the number of soot.
  • To clean the electrodes of the candle from combustion products, you can use fine.grained “sandpaper”. First wipe them with a dry cloth, and then wipe it carefully with sandpaper. If the space between the device body and the insulator is also clogged, its cleaning will help with the help of a conventional unclaimed paper clip. To do this, soak the candle in diesel fuel for a short time, and then clean the dirt. If the blockade is small, one procedure is enough. With strong contamination, it is sometimes necessary to repeat this several times. After thorough cleaning, the spark plug should be wiped dry from diesel fuel residues, and then use for its intended purpose.
  • Please note that the mower (gasoline, electric or wireless) of foreign production requires slightly more care than domestic. In particular, many people strongly recommend entrusting professionals to adjust the carburetor of a two.stroke engine, especially if the guarantee has not yet expired.
  • Finally, one more advice: follow all the recommendations of the manufacturer for the operation and maintenance of the device. Thus, you will continue to work without failures.

What to do if a gas trimmer for grass does not gain speed, you will learn further.

The Stihl 180 chainsaw does not develop speed or after releasing a gas trigger continues to work without slowing down. These problems are quite common. Let’s try to understand the reasons for which the occurrence of such malfunctions is. Also in this article we will consider how to diagnose if the chainsaw does not pull.

The main thing. Fuel mixture!

Suppose you don’t start a trimmer for grass. In this case, the first thing is to check whether the fuel is enough in the tank, as well as evaluate the quality of the fuel mixture. To refuel a motorized unit, it is necessary exclusively high.quality gasoline. It is recommended to use fuel, the brand of which is not lower than AI-95.

Why is a trimmer not starting for grass gasoline? Incorrect preparation of the fuel mixture may also lead to this, which consists of oil and gasoline. The proportions in which the specified components are connected are indicated by manufacturers in the guide for the operation of a trimmer for grass. Preparing the fuel mixture is extremely not recommended in large volumes, that is, for the future.

Another common cause, due to which a trimmer for grass does not start, is the presence of a blockage in the filter area. To confirm the conjecture, just dismantle the indicated block and try to start the unit without it. If the engine of the trimmer for the grass has launched, most likely you will have to replace the air filter or at least perform a thorough purge of the old.

Are Battery Lawn Mowers and Grass Trimmers Worth It?

In the presence of abundant contaminants on the surface of the filter element, it is necessary to use a new grid. Relying to such actions, you should not leave a suction pipe at all without a filter. After all, rush in this case can lead to the need to repair the entire piston group of the unit engine.

In this case, the remains of plastic plastic dissolved in the brutal environment are created in the combustion chamber so terrible things that you will definitely not be able. Why does a trimmer for grass stall when you press the gas? The reasons for stopping a trimmer for grass at high and idle speeds, when heated or opened by an air damper. But you certainly remember how to correctly store fuel.

What to do when the fuel was definitely ordinary, there is a spark, but a trimmer for grass does not start a gasoline? Maybe you just flooded the candle with gasoline. In this case, it needs to be unscrewed, wiped with an unspoken rag and dry. By the way, it will be completely useful to check the spin for performance itself.

Operating advice

It is worth paying attention to several recommendations for working with a benzoca or a trimmer that extend the service life of the device to several times.

  • As soon as you notice that the lawn mower or trimmer vibrates for the grass. immediately stop working and check the serviceability, performance of specific parts.
  • Valves adjustment and checking the work of pistons and cylinders, cleaning and changing the nozzles perform, starting from the requirements set forth in the user guide and the recommendations of the masters of service centers.
  • When air bubbles enter the system due to impaired fuel hose-give in to gas. With the combustion of gasoline with higher speeds of the gas bubbles motor will be less. But this is a temporary measure. As soon as possible, disassemble the unit and eliminate the cause of the suction of excess air.
  • Do not work as a unit in cold weather, not heating the engine. under load it can often stall. The effect here is the same as in the case when the driver in.40 started the car and immediately drove off, without waiting for the engine heating.
  • Do not leave the unit on the roadway. During the accident, the hit will immediately break, and this will make the purchase of a new unit for a forced measure. A car that has crashed into it at best will receive damage to the body and bumper.
  • Avoid working with a motorcycle or a trimmer in a downpour. Water getting along with air in the worst case can lead to engine explosion. Similar situations arose with cars.
  • Do not use unverified vehicles and lubricants. The mower warms up the engine more than it would do the car itself. when overheating, it will automatically lose its lubricants. It will turn into a burned out reagent. sticky, too viscous and viscous, like fuel oil. He will immediately stall (and drown out) the motor.
  • If the oil is old, previously merged from the tank of the machine or other (or the same) lawn mower (on a 4-stroke engine)-defend it, filter to clean from dirt and metal. But at the first opportunity, purchase fresh motor oil.
  • If the engine is two.stroke. observe the ratio of gasoline and oil. For compositions with mineral oils, this is approximately 34: 1, for semi.synthetics. 42: 1, for purely synthetic. 50: 1. Do not violate these proportions: “rewinded” gasoline will not burn out and quickly clog the engine, “under.appropriate”. will accelerate the wear of its mobile parts.
  • In terms of viscosity to winter classes, they include marking oils: SAE-0W/5W/10W/15W/20W/25W. To the summer-SAE-20/30/40/50/60. For example, SAE 10W-40 is already all-season oil (when working mowers from spring to autumn inclusive). Be sure to check with the manufacturer exactly what oil is needed.
  • Always use high.quality gasoline that has passed the manufacturer all stages of cleaning.
  • Recommended octane number of gasoline-AI-92/95/98. The use of the 76th can lead to a non-power of the engine by frequent stalling if you are poured, for example, the 76th or 80th gasoline.
  • If you are not sure of the independent solution of problems with a gas station (which does not gain move and often stalls)- call the master or contact the service center for repairing motor and garden equipment. Specialists do not get used to doing this work for you.

Observing all these precautions, you will give your mower for many years of fruitful work, and yourself. the luxury of well.groomed lawns, comfort and convenience when mowing unnecessary vegetation in your site.

About the reasons why the lawn mower stall when you press gas, watch in the next video.

The gasoline trimmer for grass stalls at idle

Often, when reducing the speed, the motor motorcycles stalls and does not support idle speed when re.starting. The main reasons for the occurrence of such a breakdown include pollution or the dumping of the carburetor, as well as clogging of the air filter.

Gasoline trimmer for grass stalls at idle

In case of violation of the optimal settings of the carburetor, it is necessary to clean it and repeated adjustment. You can cope with clogging the air filter of a trimmer for grass by placing it for several hours in a solution with a conventional domestic detergent. If independent cleaning has not helped to cope with the blockage, it is better to purchase a new filter element in accordance with the operating manual.

After the measures, the user will not encounter a situation for a long time when a trimmer for grass stalls in idle and functions only when gas supplies.

They brought a Chinese benzotrimmer for repairs (they said it turned in the back, we are undergoing to start like.

Apart from time to time, from time to time, gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick. To find out, try to use the braid by loosening the gas tank cover. If in this mode the device is working on a dull way, clean the valve.

over, the lawn mower can stall due to the disgusting receipt of fuel in the carburetor. Nevertheless, repair t.e. It works normally at low speeds. Why then the device starts up, ask you? The reason for this is that at first, the fuel gradually runs into the carburetor and is enough to work at high power. The lawn mower does not work at idle. But then it is produced and at huge turns the engine begins to stall. As for the carburetor, here the problem may also consist in the fact that its body is very pulled.

In addition to everything else, do not forget to check the fuel intake hose. The inconsistent may be that it holds weakly or in general cracked.

These are the main prerequisites why the lawn mower can stall.

Air filter

On the pages of the global network, you can find information that the chainsaw of the Stihl 180 can stall due to severe air filter pollution. I would like to refute this not absolutely true information, and say that the STIHL carburetor MS 180 is equipped with a compensator, which is designed and installed in order to make an air focus necessary for the usual operation of the Stihl 180 chainsaw, bypassing the dirty filter. Of course, the power with a clogged air filter will fall a little, but it will definitely not stall. Another capacity may fall due to the wear of the piston, here the repair of the piston chainsaw of the Stihl MS 180 will already be required.

Forbidbenzokos when clicking on gas: causes of their solution.Glumpnbenzokos (trimmer for grass):. Fighting.

  • idle sensor failure;
  • clogging of the throttle;
  • work of the sensor of the position of the trissellain;
  • Injector or carburetor pollution

The grounds for breakdown can be completely different, therefore, when eliminating them, it will be necessary to operate with all kinds of actions and techniques. If your shoulders are considerable driver’s experience, and you know the features of the car’s work as your five fingers, regardless of the model, then the elimination of this kind of malfunctions will not cause you any problems. And all because such breakdowns are not complex or serious. It follows that you can establish the operation of the car without outside help. Well, if the level of awareness or lack of free time will not give you the opportunity to eliminate all defects yourself, it is better to seek help from knowledgeable people who can save you from unpleasant moments in the shortest possible time.

Trimmer does not start for grass

Like any technique, trimmers for grass are subject to various breakdowns. Often at the beginning of the summer season, the owners of such a tool complain that the trimmer does not start for the grass, and you have to look for a long time to look for the cause of the malfunction.

For those who have acquired a trimmer for grass recently and still on “you” with this technique, information will be useful about why the trimmer for grass is not started and what to do in this case. So, let’s find out what can cause this.

A gasoline trimmer for grass is not started. 10 possible reasons

Before trying to independently establish the work of the tool, carefully study the guide for its operation. Perhaps the information contained in it will promple you with one or another thought. Otherwise, you will have to look for the cause of the malfunction by selection. It may be one of the following:

  • The cupcan on the rod is not transferred to the “v.””. This is one of the elementary actions, but sometimes beginners forget to turn on the tool before starting it.
  • Such errors include the absence of fuel in the tank. If the fuel ends, and you forgot about it, just pour into the tank (usually located near the motor) AI-92 gasoline.
  • Absence, inappropriate mixture or incorrect proportion of engines oil. Ideally, you should regularly add no more than 50 g of oil. This will serve as an additional lubricant and will support the engine of your trimmer for grass in working condition. Also consider that oil is of different types (“synthetics”, “semi-synthetics”, “mineral water”)-all of them affect the operation of the mechanism differently.
  • If a trimmer mowel for grass does not start after winter, drain the fuel remaining in the gas tank and replace it with fresh. This is especially true for small low.power trimmers with small engines sensitive to low.quality mixture. In addition, during the winter, a precipitate may form at the bottom of the gas tank, which is due to which problems arise with the operation of the device.
  • Excessive fuel pumping can also become one of the reasons that the trimmer for the grass has not stalled and does not start. Когда воздушная заслонка перекрыта, свечу заливает топливом. It should be twisted and dried, and then inserted into your place and try to launch the engine, holding the gas trigger. It is advisable before this to check it for the presence between the electrodes of the spark. If there is no spark, the candle should be replaced.
  • Problems with the filter. If your trimmer for the grass starts poorly, remove the air filter and run the tool without it. If everything works out, the filter should be changed to a new. As an option. to carefully clean and blow the old one, but sooner or later the replacement will still have to be done.
  • trimmer for the grass stalled and does not start? Try to clean the so.called sapun. an element designed to level pressure in the gas tank. Cleaning can be done with a regular long needle. The clogged soundtrack often becomes the cause of the malfunction.
  • Knives are removed from the car. some models will not work under this condition.
  • Violation of tightness. You can check this using a pressure gauge. If the pressure begins to fall, you should determine which of the parts of the carburetor is faulty. Most often, carburetor gasket wears out.
  • Sometimes, after a long period of work, you can notice that the trimmer for the grass has overheated and does not start. Firstly, you should know that you should definitely take breaks. The amount of continuous operation time recommended for this model should be indicated in the instructions. Also, the problem of overheating can lie in a faulty ignition coil or in the air cooling system, which prevents overheating.

If none of these actions has given a result, you should contact the repair shop or service center.

Why and what to do if a trimmer stalls for grass

There are several reasons why the trimmer for grass stalls when the grass. Usually the problem is provoked:

  • wear of engine elements. piston, bearings, crankcase;
  • malfunctions with fuel supply. a carburetor can fail in the device, sometimes a malfunction causes a clogged filter;
  • mechanical damage to hoses, tubes and cables;
  • disobedience with the ignition chain.

Most often, under a load for one reason or another, an old trimmer for grass, which has long been in operation, stalls for a particular reason. But sometimes the owners of new gasoline devices face problems.

Why is a trimmer for grass stalling when pressing gas, increasing speed

If the trimmer for the grass stalls when you give gas, then the problem is usually a malfunction of the carburetor adjustment. The malfunction often occurs if the device was inaction for a long time, and then received a significant load. Sometimes the unit stalls immediately after increasing speed, if before that it was operated in difficult conditions with violation of the rules.

The following reasons are also leading to problems with the performance of the device:

With stretching or rupture of the fuel hose in a gasoline trimmer, the elements that have become unusable must be changed. If the reason is in the clogged valves and filters in the unit, they are quite simple to clean.

If the reason that the trimmer stalls for the grass is caused by problems with the carburetor, the problems are accompanied by vibrations

Another common problem is that the trimmer for grass stalls with increasing speed due. In this case, you need to find the instructions for the device and carry out the reconfiguration of the unit. Often it is enough to weaken the tightening of the carburetor body.

Why does a trimmer for grass stall at idle

Garden trimmer for grass often stalls even at idle. The reasons for the malfunction are usually simple. First of all, the improper adjustment of the carburetor affects performance. it leads to problems both at high speeds and in idle mode. Turning off the device can provoke clogging of an air filter or throttle.

Sometimes a trimmer for grass stalls if incorrect fuel is used for it. The gearbox for this reason overheats and reduces momentum.

If a malfunction occurs, it is necessary, first of all, to inspect the carburetor unit and perform mechanical repair or configuration. If the cause is of poor.quality fuel, you need to replace the mixture with a more suitable.

What to do if the trimmer for the grass starts and immediately stalls

If the trimmer for the grass does not gain momentum and stalls immediately after starting, the problem usually consists in improper tuning the carburetor. In this case, fuel in the system comes unevenly, the gasoline unit vibrates and cannot work normally. Repair consists in reconfiguring a carburetor unit according to the instructions from the manufacturer.

Engine stop causes fuel supply valve. The element must be carefully cleaned, and then installed back in place. If the lawn mower still stalls immediately after starting, perhaps the valve is too tight and it needs to be loosened. In this case, the fuel mixture will begin to circulate through the system freely, and problems with the performance of the unit will disappear.

In some cases, a gasoline trimmer for grass stalls due to the fact that the hose contains damage that pass the air. During the repair, you need to replace the fuel tube with a new.

Attention! If the damage in the hose is insignificant, it is allowed to simply add a revolution drive. This will allow you to drive out air bubbles from the fuel system.

What to do if the trimmer works and stalls for the grass

Owners of garden gasoline units are faced with the fact that a trimmer for grass stalls at large speeds after a short work. First, the device begins to function with jerks, and then gradually stops.

Typically, the reason is the overheating of the system. gasoline in the carburetor simply boils. A trimmer for grass can heat up if the ignition circuit coil or wire is damaged. There is no point in repairing worn details, they are simply changed to new working.

The use of a trimmer for the grass does not lead the use of not disk, but rotary damper in a carburetor

What to do if the trimmer for the grass overheats and stalls

If a hot trimmer stalls for grass, the situation is a great danger to the performance of the unit. Repair should be carried out immediately, otherwise the device will be completely unusable, and it will be more difficult to restore it.

Overheating of the unit usually cause the following reasons:

  • The use of inalitions. pour fuel into the tank with precisely with such an octane number that is recommended by the manufacturer;
  • a large amount of air in the system. for this reason, the enriched mixture releases an excess of heat;
  • non.compliance with the proportions of oil and gasoline in the preparation of fuel;
  • The thick layer of soot on the muffler. soot is a good heat.insulating material, the gasoline braid for the grass during operation is very hot and stalls;
  • The displacement of the axis of the spit.headed head inside the bar. for this reason, the rotation slows down, and the load on the engine increases.

If the gasoline unit stalls, you need to carefully examine it and eliminate first of all possible deformations of the structure. Then it is necessary to study the fuel parameters. If they do not correspond to the recommended, gasoline is replaced with a more suitable. If unnecessary air gets into the system, it is necessary to independently or with the involvement of specialists to adjust the position of the carburetor damper.

Sometimes a gasoline trimmer for the grass overheats and stalls because there is too old fuel in the tank. Use a fresh mixture for the unit, which was stored no longer than two weeks.

Attention! A trimmer for grass will overheat if you use it for too long, or mow with a weak device hard thick grass.

How to avoid breakdowns

Many breakdowns of a gasoline trimmer for grass can really be eliminated if you remove the causes, but if possible, it is recommended to, in principle, avoid faults. Simple measures allow to maintain the unit in a working state:

  • You need to use a trimmer for grass in accordance with the recommendations of the manufacturer. It is impossible to use a weak device for removing hard weeds on the site, it is also not recommended to use motorcycles in excess of the due time. The gasoline unit needs to be turned off regularly and allow it to cool down.
  • During the operation of the device, it is necessary to monitor the state of the cooling system. To maintain performance, the channels in the case are regularly cleaned, like the starter’s ribs. The clogging of the system often becomes the reason that the unit stalls from overheating.
  • After using the gasoline trimmer for the grass, too, you need to clean. In this case, the procedure is not carried out for a hot unit, at first it must completely cool. For cleaning, use solvents, kerosene and other products allowed for use by the manufacturer.
  • Before cleaning, the motorcycles for storage must be drained from the tank, the remains of unused fuel. If this is not done, the gasoline mixture will fall into heavy components and will clog the channels of the carburetor, which will subsequently cause malfunctions. After draining the fuel, the device is launched at idle and waited for it to turn off.

With the onset of autumn, a gasoline trimmer for grass must be correctly removed for storage. First, the residues of the fuel mixture are drained from the device, and then the unit is disassembled, rinse and clean all removable components.

Before harvesting gasoline motorcycles for storage, you need to evaluate the condition of its parts, carry out the necessary repair and replacement of nodes. Air filter needs to be cleaned. The engine is partially disassembled, rinsed and blown by moving elements, and then applied a new grease. To maintain the piston part, the candle is unscrewed and the piston itself is lifted to the top point, and a little oil is poured into the opening opening and the crankshaft is twisted several times.

Store a gasoline trimmer for grass in winter is necessary in a warm room

The lawn mower stalls hot? There is a solution!

The lawn mower stalls hot-this means that there is already a certain amount of fuel for starting the engine, but after 5-10 minutes of operation, it stops working in the engine. This motor behavior indicates problems with the fuel filter.

The lawn mower is a mobile high.performance tool for ennobleing personal plots and adjacent territories. With prolonged operation due to wear of parts or production marriage, there are malfunctions that lead to the fact that the trimmer for the grass stalls or does not start. Since this tool is a rather complicated mechanism, because the reasons why the lawn mower stalls can be several.

There are two main ways to eliminate problems: transmitting braids for grass to a specialized center or solving the issue with your own hands. The first option is suitable for those who are ready to lay out a “round” amount to restore the performance of the unit, and the second for someone who has basic locksmith skills and can independently deal with the causes of breakdowns and ways to eliminate them.

It is currently customary to classify breakdowns by which the lawn mower stalls in the following categories:

  • mechanical damage to the ICE crankcase, malfunctions of the cylinder.piston group (CPG);
  • breakage associated with the supply of fuel mixture (air filter, carburetor);
  • problems due to damage to tubes, hoses, cables or ignition circuits.

The lawn mower stalls at high engine speeds

During operation, a situation arises when, when pressing the fuel supply key, the aggregate turnover begin not to increase, but to decrease. A malfunction of this nature can be caused:

  • etching of atmospheric air into the combustion chamber;
  • problems with the circulation of a mixture of fuel;
  • clogging the saapun in the lid of the fuel tank (cleaning the hole with a thin sewing needle);
  • Incorrect carburetor adjustment.

When air sunses, when I operate ICE, it is necessary to check the tightness of the pipes and the integrity of the gaskets in the CPG. The problem with the circulation of the fuel mixture can be solved by the elimination of blockages in the fuel pipes leading to the carburetor. If a vacuum occurs in the tank and not receipt of the fuel mixture to the carburetor, it is enough to clean the soundtress with a thin needle and blow it with air.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

mower, idle, lawn, trimmer

Naturally, a rather harsh fault may be a prerequisite for this. The lawn mower does not develop speed, the cause of the back. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when the lawn mower stalls at high speeds. There are quite a lot of these circumstances.

Another is the presence of defects in the power system.

Trimmer for grass does not gain momentum. what to do?

Trimmer for grass does not gain momentum. very frequent inconsistency and of course does not always have a common solution.In this.

In this case, the lawn mower will stall at idle. The lawn mower does not develop speed, reason | Funnydog.TV. Dilems with the power system may lead to a drainage or incorrect adjustment of the carburetor.

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

The incorrect adjustment of the lawn mower can be corrected by simply adjusting it in coordination with the requirements indicated in the operating annotation.

Apart from time to time, from time to time, gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick.

To find out, try to use the braid by loosening the gas tank cover.

If in this mode the device works in an affirmative way, clean the valve.

over, the lawn mower can stall due to the disgusting receipt of fuel in the carburetor

Why then the device starts up, ask you?

The reason for this is that at first, the fuel gradually runs into the carburetor and is enough to work at high power.

But then it is produced and at huge turns the engine begins to stall.

As for the carburetor, here the problem may also consist in the fact that its body is very pulled.

The prerequisite is that the lawn mower stalls at high gas speeds, there may also be an air leak.

We are talking about the likely presence of a place through which air can pass in the process of heating the motor.

In addition to everything else, do not forget to check the fuel intake hose. Trimmer for grass does not develop turns. One of the reasons. The inconsistent may be that it holds weakly or in general cracked.

These are the main prerequisites why the lawn mower can stall.

10 best electric trimmers, the characteristic in the ranking, many owners of private houses and cottages carefully care for a personal plot. When the active growth of grass begins, then there is a need for special technology. The modern market offers a choice of lawnmands, lawnmands, electric trimmers for grass. The latter are favorably different in.

Gasoline trimmers for grass help to put things in order on a suburban area. If the electric ships are suitable only for the “cosmetic” haircuts of lawns, then the lawn mowers are used for the all.encompassing chosen select a gasoline trimmer for the grass for giving. Overview of benzotrimers. The best design contributes to the highest productivity of the tool, the width of the mowing of the compass.

| Denial of responsibility | Contacts |RSS