Wire strip tool

tools and gadgets for working with electrical cable from AlieXpress

Carrying out local electrical work at home or in the countryside, is quite accessible to almost any handy man. To set up and make it easy to perform, you need an arsenal of tools and appliances to get the job done right and neatly. In this selection gathered such gizmos, which will be useful to any handyman at home. The main thing is not to forget to turn off electricity before any action.

wire, strip, tool

Cable stripping tool

First you need to prepare the cable by cutting off a piece of it to the right length, or, for example, trim individual old or damaged wires protruding from the braid to the same length. This can be done with special cable cutters with rounded edges, adapted specifically for cutting cable. There are several versions of this tool for different cable diameters from 25 to 70 kV on the product page.mm

Pliers for low-voltage cables

If you work with thin low-current wires, twisted pair, cutting feet of electronic components, etc., it is more reasonable and convenient to use small special cutters with bent at an angle of 45 degrees working elements with sharp cutting edges for cutting purposes. The tool is equipped with a return spring and insulated handles.

Cable stripping pliers

Perhaps one of the most popular and common tools for working with cable is the special stripper. Their popularity is due to their versatility, t.к. the pliers can remove the braid from the cable in a fairly wide range of its cross-section from 0.5 to 6 kv.mm. In addition, this tool can both cut the wire and crimp the terminal, if it is used for connection. Pliers equipped with an insulation cut length limiter. When buying the tool, I advise to choose the D3 version on the product page as it is more durable.

Searching for the Best Wire Stripper

Portable stripper

If extra functionality and carrying around a large wire stripper is too much trouble, you can use a small stripping tool like this. This gizmo is suitable for work not only with electrical, but also coaxial cable or twisted pair, t.к. it is possible to set the diameter of the cable to be worked with the tool. Usage is simple, the tool is placed on the wire and rotated around it to cut and remove the insulation of the desired length.

Pliers and pliers for working with cable

In addition to special tools for cutting and removing insulation, it is logical to have in the “tool kit” and more versatile, such as pliers or wire cutters, equipped with elements specifically designed for electrical. These tools will not only allow you to remove the braid or cut the cable, but also trim the cable channel, remove fasteners and perform other related operations. Several different size options are available on the product page. Tool features well-insulated handles.

The tool for twisting wires

After the wires are cut and stripped of their insulation, they must be connected. There are many ways to connect, one of them is stranding wires. Hand-twisting, especially if the wires have a fairly large cross section, is quite problematic. However, there is a special device that can both cut the insulation and neatly make a reliable stranding of multiple wires. The tool comes in two versions: for making stranding by hand (with protruding handles) or using an electric screwdriver. Two to five wires can be stranded at a time. Although it is claimed that the tool can strip the insulation, I would recommend that you do this beforehand and strand the wires already clean.

See also  What kind of oil do you put in your STIHL power washer?

Crimping tools for stranded wires

Proper wiring should be done with stranded wire, and it is better to connect such cable by soldering or with the help of terminals. When using terminals, screw or clamp, in order not to damage the thin strands of wire, it is highly desirable, on the ends of the wire stripped of insulation, put NSHVI (pin lugs, bushing insulated). For their fixation just such pliers are required, they evenly compress from four (or six) sides of the tip, so it was well fixed and got a large area of contact. On the product page there are not only the pliers themselves, but also sets with tips of different diameters and lengths. I recommend to buy the version with six crimping cams, I myself use it for installing lighting fixtures, electrical plugs for devices, etc.

Pliers for special terminals

It often happens that when repairing some electrical device you need to replace the end of the electrical wire broken off or burnt terminal of a certain shape. There are many variants of these clamps, including the thickness of cable to which they are installed and how they are fixed to it. For this purpose, you can use universal pliers, designed just for crimping them. The tool has replaceable dies that can be changed to suit the terminal type. Different kits with various numbers of interchangeable dies can be selected on the product page.

Soldering kit for electrical work

Socketing and terminals, of course, is good, but often you just can’t do without soldering the connection of electric wire. So the soldering iron is an irreplaceable thing for every home handyman. All-in-one kits are great for household use. All components necessary for comfortable soldering are included in the kit: soldering iron with temperature control of the tip, solder, stand, interchangeable tips, tweezers and even a small multimeter. The whole kit comes in a zippered case. A 60W soldering iron is enough for all your household needs.

Heat Shrink Tubes

Any electrical connection of the cable must be insulated to avoid the possibility of a short circuit. For this, you can use duct tape (blue 🙂 or use heat shrinkable tubing that shrinks and thickens when heated. In a set of tubes of different diameters, length 45mm. Simply put on the electrical wires and heat the tube with a soldering iron or heat gun.

I hope that the tools and appliances collected in the set for work with electric cable were interesting, and maybe useful 🙂 Other popular product picks and reviews of interesting gizmos, you can find below in the author’s profile. Thank you for your attention. Happy and profitable shopping!

Stripper. easy to use

The best and most popular strip tool that makes the work process as easy as possible. The tools come in a wide range of styles.

Working principle of various models

Operating mechanism is based on processing the cable with two movable knives that have a semicircular shape. The caliber of the cut is adjusted to the cross section of the wire, guaranteeing the accuracy of the incision and no damage to the metal conductor.

See also  Wire stripper ws 07

Depending on the automation of the process, there are three types of strippers:

A handheld stripper. Insulation stripper has a simple design and is used for stripping individual wires.

Manual stripper works easily. General stripping pattern:

  • Determine Wire Diameter.
  • Choose the appropriate hole on the jaws of the appliance.
  • Bite the cable, pushing down on the handles.
  • Remove the braid from the wire by moving the stripper in a circular motion.

If you choose a socket with a smaller diameter than the wire cross section, there is a risk of damaging the wire. If a larger hole is used. the braid will not be removed.

  • compact size and light weight;
  • the ability to crimp the lug;
  • several gaps under the wires. usually up to seven with a range of 0,25-2,5 mm.

Semi-automatic stripper. This option is more convenient for large volume operations. Semi-automatic unit features a mechanism that does not require the stripper to rotate around the wire.

Automatic. The tool makes the job as easy as possible. The user does not need to select the diameter of the cross section of the wire. The device has one socket, the size of which automatically adjusts to the wound cable.

The stripper is suitable for stripping conductors of a 0.2 to 6 mm cross section.

Most automatic strippers have advanced functionality. In addition to the direct task they are able to perform:

Automatic stripper can strip single- and double-insulated wires. The tool removes only the top sheath in one pass. To remove the lower braid, the manipulation has to be repeated.

Options for choosing a stripper

Buy tools should be based on the specific activities. Before you go to the store, you need to compare the following criteria:

  • Scope of application. professional or consumer
  • Scope of work. regular or occasional use;
  • skills of using tools;
  • purchase budget.

For professional electricians it is definitely better to choose semi-automatic or automatic devices, designed for cleaning of large amounts of cables. High price of the devices is justified by speed and convenience of work.

The home handyman can “enrich” his arsenal of tools with a manual stripper. If you are not skilled in working with electrical wiring, it is better to choose a semi-automatic machine. the risk of cutting wires is minimized.

Preference should be given to reliable producers who guarantee material safety and operational durability of the tool. It is better to give up cheap models made of low quality alloys and with plastic housings.

You can read more about how to choose a stripper in this article.

How to use the braid correctly

The braid is easiest to use with solid soldering iron tips, like a hatchet or mini wave.

If you have a braid without flux, then add some paste flux to the contact area.

Let’s try removing the solder from some massive contacts. Add a little more flux. Without flux, there will be no surface tension, and the solder will not collect well in one spot. Also, the braid itself has small oxides that only flux can remove. Flux paste spreads evenly across soldering iron tip and copper braid wires. Now place the braid over the pins with a small margin. Mix it with the flux, and use the soldering iron to hold it in place. Soldering iron temperature not higher than 300 ℃.

The braid takes on the solder and loses its properties, so gradually move its tinned part to the other side and work with a “fresh” part of the braid.

See also  How to cut and connect the LED strip

It is important not just to lean the soldering iron against the braid, but to move both soldering iron and braid from side to side to evenly distribute the solder and remove it from the board faster.

And the solder is slowly being removed from the pins.

The solder is not all the way out and you will have to go over the braid with the soldering iron again, but there is already a visible result. Some pins are completely free of solder.

What to do if the solder does not remove well from the board

There are situations where you can’t remove the solder from the hole after the part. For example, you unsoldered the part and the solder remained and covered the hole. And even a braid doesn’t help remove it.

Re-solder the hole with fresh solder. That is, just add solder to the hole so that it joins up with the one you can’t remove. Now go back over the hole with the braid and the solder will come out.

Old and new solder are combined in a single drop and the solder sticks easily to the braid.

Soldering iron

Another method of cable stripping is using a soldering iron. The sting of the device is heated to the desired temperature, after which the insulating layer is removed according to the principle described above (work with an electrician’s knife): the wire is twisted with the finger, the soldering iron makes contact with the sheath.

The disadvantage of this method is the unpleasant smell of heated materials. In addition, a soldering iron is not the best option when it comes to rubber sheathing.

Regardless of how you choose to strip the insulation layer, you must handle the wire very carefully to avoid damaging the core. For beginners as the most preferable tool we can recommend a semi-automatic stripper.

Devices (pullers) for stripping wires of insulation

3 Months Warranty.

automatic. multifunctional with microtuning screw

Guarantee 12 months.

automatic multifunctional TM-1

The warranty is 60 months.

12 Months warranty.

Pliers Dr. IRON DR6004 for stripping, crimping, cutting wire 200mm, blister

12 Months warranty.

12 Months warranty.

wire stripper, wire cross section 0.9; 1.25; 2; 3.5; 5.5mm2

12 months warranty.

12 Months warranty.

Guaranty 60 months.

Insulation clipper standart for cutting insulation 150mm

12 Months warranty.

12 Months warranty.

180 mm automatic, handles with plastic covers

12 months warranty.

12 Months warranty.

12 months warranty.

12 months warranty.

Guarantee 12 months.

The warranty 12 months.

12 Months warranty.

CS 6” stripper, two-piece handle

Guarantee 12 months.

12 months warranty.

12 months warranty.

Guarantee 24 months.

24 Months warranty.

Guarantee 12 months.

for wire stripping with dielectric handle

Guarantee 12 months.

12 months warranty.

12 months warranty.

12 months warranty.

12 Months warranty.

Knife with hook

Considered a professional tool. Its blade is short and straight with a hook at the end. The sharp edge is either missing (only the hook is sharpened) or on the opposite side as a supplement. Suitable for stripping all major types of cables.

Such a knife is convenient for cutting insulation from cable along. Many models are equipped with other tools that allow you to make and circular cuts before stripping the insulation from the wire. Is very popular among professional electricians.

| Denial of responsibility | Contacts |RSS